- Model NO.: SH181E
- Usage: Farm Tractor
- Drive Wheel: 2WD
- Service Life: 6-10 Years
- Color: Red
- Power: 18HP
- Transport Package: Plywood Case Packing
- Origin: Shandong
- Type: Walking Tractor
- Certification: ISO, CCC, ISO/TS16949
- Fuel: Gas / Diesel
- Size: Small
- Condition: New
- Trademark: SH
- Specification: ISO
- HS Code: 87011000
QINGDAO XCMG CO.,LTD Agricultural Machinery produce the most popular walking tractors and power tillers in China.
1. The SH181 Power Tiller/Two-wheel Tractor is of dual-function type that can be used as a means of traction as well as drive.
2. It is featured by its simple and compact structure, good reliability, long service life, easy operation, ample output, light weight and good cross-country ability.
3. It is more powerful and efficient than SH151. It is very suitable for use in paddy fields, dry fields, orhards, vegetable gardens and hilly land with a little inclination.
4. It can be used for rotary tiller, ploughing, harrowing in paddy fields, harvesting, drilling, ditching, transportation and etc. If suitable farm implements or accessories are attached.
5. In addition, it can also be extensively used as a stationary power source for small scale drainage and irrigation, sprinkling, grain threshing, cotton ginning, flour milling, fodder cutting and so on.
| Model of Power Tiller | SH181 |
| Structure weight without rotary tiller | 360KG |
| Structure weight with rotary tiller | 465KG |
| Working Weight (with rotary tiller) | 505KG |
| Turning speed of rotary tiller shaft | 188RPM |
| Overall dimensions (L×W×H) | 2680×960×1250mm |
| Number of blades | 18 |
| Rotary tiller width | 600-1000mm |
| Type of tractor | Single axle,dual-purpose for both tractor &drive |
| Traveling speedForward | 1.4, 2.5, 4.1, 5.3, 9.4, 15.3km/h |
| Traveling speedReverse | 1.1, 3.8km/h |
| Tire Size | 6.00-12 |
| Wheel track | 800,740,640,580(normally use 800) |
| Min.ground clearance | 185 |
| Min.turning radius | 0.9(with no rotary tiller) |
| Model of engine | SH1110A2N |
| Type of engine | Horizontal 4-stroke |
| Bore×stroke | 110×115mm |
| Total displacement | 1.2L |
| Compression ratio | 19.5:1 |
| Turing speed of crankshaft | 2000RPM |
| 1-hour rated output | 18HP |
| Specific fuel consumption | 257g |
| Specific lube oil consumption | ≤2.04g |
| Cooling mode | Condenser(Radiator) |
Floor Deck Forming Machine,Roll Forming Machine,Cold Roll Forming Machine
Shanghai Allstar Industrial Co., Ltd. , http://www.shrollformingmachine.com