25kg Pet and PP PE Pellets and Granules Dehumidifier with Dryer and Loader

Posted on

  • Model NO.: SCD
  • Operational Method: Continuous
  • Drying Medium: Air
  • Heating Mode: Transmission
  • Type of Flow: Cross Flow
  • Sprayer: Air-Flowing Type
  • Transport Package: Wooden Package
  • Origin: China
  • Structure: Air Flow Drier
  • Operation Pressure: Vacuum Dryer
  • Appearance of Dried Sample: Pellets
  • Movement Way: Combined
  • Type of Atomization: Rotary Atomization
  • Trademark: SHICA
  • Specification: Honeycomb
Plastic Dehumidifier

1. Specification
1. Adopted P.I.D. temperature controller, the equipment can show on screen set temperature and actual temperature.
2. Up-to-date chain-wheel transmission design with more stable performance, to avoid traditional belt's disadvantage under high temperature.
3. Double condensors structure to ensure lower return air temperature and dew point.
4. The dew point of processing wind can reach -40 Centigrade. A better honeycomb is optional to use so as to make dew point reach -50 Centigrae.
5. A dew point gauge is optional to use in order to monitor dehumidifying effect anytime.
6.Equipped with emergency stop switch and protective devices of short circuit,phase-sequence,blower overload,over-heating and rotor fault etc..
7. Nice design, polish appearance, easy to move2.Mode list
Model SCD 25/60 50/60 50/90 75/90 100/120 100/150 150/150 200/200 300/200 400/300 500/400 600/500
Insulation Tank Capacity kg 25 50 50 75 100 100 150 200 300 400 500 600
Dehumidifier air volume m3/h 60 60 90 90 120 150 150 200 200 300 400 500
Drying blower power kw 0.37 0.37 0.75 0.75 1.1 1.5 1.5 2.2 2.2 3.75 5.5 7.5
Regeneration fan power kw 0.12 0.12 0.12 0.12 0.18 0.18 0.18 0.37 0.37 0.37 0.75 0.75
Dry heating Power kw 2.4 2.4 3.6 3.6 6 6 9 12 15 15 18 18
Renewable Electric Power kw 2.4 2.4 2.4 2.4 2.4 2.4 2.4 3.6 3.6 3.6 6 6
Feeding blower power kw 0.75 0.75 0.75 0.75 1.1 1.1 1.1 1.1 1.1 1.1 2.2 2.2
Feeder piping inch  1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2 2
Vacuum Hopper L 6 6 6 6 6 6 6 12 12 12 12 12
Electric eye hopper L 1.5 3 3 6 6 6 6 12 12 12 12 12
Height cm 153*98*85 153*102*85 153*102*85 183*102*85 182*116*95 182*116*95 222*116*95 195*157*95 240*157*95 270*157*95 275*185*112 300*185*112
Weight kg 320 344 375 385 442 450 475 560 585 635 640 750

Series Steel Structure Industrial Cooling Tower

Tower structure: all steel structure, tower skeleton, cloth water system, climbing ladders, guardrails are Q235-B material, anti-corrosion using hot-dip galvanizing, surround panel for glass Glass steel.

Windpipe: kinetic energy recovery type, air flow organization is reasonable, high efficiency;
Fan: Wing-type adjustable cooling tower dedicated shaft fan, blades are aluminum alloy or glass steel.Motors,

gearboxes: YE2 series outdoor energy-efficient energy-saving motors, protection class IP55, insulation class F-class.


Filler: modified PVC raw material thin belly filler, high temperature, aging, flame retardant, bonding into a block strength.

Water receiver: the use of high-efficiency low-resistance rib arc water receiver, modified PVC material pull squeeze molding, water collection effect is significant, the drift rate is less than 0.01%.

The fan system tower is equipped with motors, gearboxes, fan access platforms and passageways, and there are climbing ladders and guardrails outside the tower.

Pool: This tower's pool and foundation, pre-buried steel plate, etc. by the user is responsible for, the water level should be controlled at -0.25-0.3m as well.

Applied to petroleum, chemical, metallurgy, medicine, electricity and other industrial large water circulation system.

Series Steel Structure Industrial Cooling Tower,Industrial Water Cooling Tower,Industrial Cooling Tower,Mechanical Cooling Tower

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com