*Â UV lamp for sterilization.
*Â The gas flow can be adjusted for different inlet gas.
*Â Dedicated gloves for a comfortable, flexible operation.
* Microprocessor intelligent temperature control with over-temperature protection.
* Operation room is made of stainless steel and the front door is made of thick transparent shockproof special glass.
* In the operation room, it is equipped with melting disinfector, experiment shelves and oxygen eliminating catalyst.
Â
| Model | BJPX-G-IIÂ Â |
| Control System | LCD display |
| Time for creating anaerobic state in sample chamber |
<5min |
| Time for creating anaerobic state in  operation chamber |
<1 hour(Oxygen concentration≤1%) |
| Time for maintaining anaerobic circumstances |
>12 h (when no supply of mixed gas) |
| Range of temperature-control in incubation chamber |
RT+3ºC~60ºC |
| Temperature fluctuation in incubation chamber | ±0.3ºC |
| Temperature uniformity in incubation chamber | ±1ºC |
| Power Supply | AC110/220V±10%, 50Hz |
| Internal Size(W*D*H)mm | 810*650*660 |
| External Size(W*D*H)mm | 1210*740*1410 |
| Packing Size(W*D*H)mm | 1340*880*1590 |
| Gross Weight (kg) | 320 |
Â
*Â UV lamp for sterilization.
*Â The gas flow can be adjusted for different inlet gas.
*Â Dedicated gloves for a comfortable, flexible operation.
* Microprocessor intelligent temperature control with over-temperature protection.
* Operation room is made of stainless steel and the front door is made of thick transparent shockproof special glass.
* In the operation room, it is equipped with melting disinfector, experiment shelves and oxygen eliminating catalyst.
Â
| Model | BJPX-G-IIÂ Â |
| Control System | LCD display |
| Time for creating anaerobic state in sample chamber |
<5min |
| Time for creating anaerobic state in  operation chamber |
<1 hour(Oxygen concentration≤1%) |
| Time for maintaining anaerobic circumstances |
>12 h (when no supply of mixed gas) |
| Range of temperature-control in incubation chamber |
RT+3ºC~60ºC |
| Temperature fluctuation in incubation chamber | ±0.3ºC |
| Temperature uniformity in incubation chamber | ±1ºC |
| Power Supply | AC110/220V±10%, 50Hz |
| Internal Size(W*D*H)mm | 810*650*660 |
| External Size(W*D*H)mm | 1210*740*1410 |
| Packing Size(W*D*H)mm | 1340*880*1590 |
| Gross Weight (kg) | 320 |
Â
Synthetic cryolite is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.95-3.01g/cm3, melting point about 1000°C, specific heat 1.056j/g°C at 18-100°C. It`s slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800°C will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Uses:
It`s mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for Resin and rubber-boned Abrasive wheels.
Synthetic Cryolite,Synthetic Cryolite Abrasive,Sodium Aluminum Hexafluoride,Industry Grade Synthetic Cryolite
HENAN JINHE INDUSTRY CO.,LTD , https://www.hntitaniumdioxide.com