Cts66/CTB66 1-10t/H Capacity 16cbm/H Wet Magnetic Separator 170mt 1700gauss

Classification of wet magnetic separator
Wet drum magnetic separator is suitable for strongly magnetic mineral. According to tank structure pattern can be divided into co-current, half-countercurrent, and countercurrent 3 kinds.

Co-current type magnetic separator ( CTS) characteristics advantages: have a large capacity, suitable for processing coarse granularity (0-6mm) strong magnetic materials selection and selection can also work more than one thread. Disadvantages: when Co-current magnetic separator is fed more capacity iron ore, magnetic mineral particles easily lost in the tailings, so to strengthen the operational management and control to be a low pulp level.

Countercurrent type magnetic separator (CTN) characteristics advantages: with a higher recovery rate, suitable for fine-grained (0-1.5mm) strong magnetic minerals roughing and scavenging operations. Disadvantages: to get lower concentrate grade. Because coarse-grained material easy to plug the sorting room, so countercurrent-type magnetic separator does not be suitable for dealing with coarse-grained materials.

Advantages of half-countercurrent type magnetic separator (CTB) characteristics: to get high-quality iron ore concentrate, and better recovery, it is suitable for processing 0.5-0mm of the mineral particles, so half-countercurrent magnetic separator is widely used in different kind of industry.

Wet drum magnetic separator magnetic component
Wet Drum Separator Permanent magnetic system, using high-quality ferrite and rare-earth magnet material to be composited, the average tube surface magnetic flux density of 100 ~ 600mT (1000Gauss-6000Gauss). Wet drum magnetic separator mainly made up of the permanent magnet cylinder, roller, magnetic system, tank, transmission parts 5 parts.

Working principle:
When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.

Sketch map:
Classification of wet magnetic separator
Wet drum magnetic separator is suitable for strongly magnetic mineral. According to tank structure pattern can be divided into co-current, half-countercurrent, and countercurrent 3 kinds.

Co-current type magnetic separator ( CTS) characteristics advantages: have a large capacity, suitable for processing coarse granularity (0-6mm) strong magnetic materials selection and selection can also work more than one thread. Disadvantages: when Co-current magnetic separator is fed more capacity iron ore, magnetic mineral particles easily lost in the tailings, so to strengthen the operational management and control to be a low pulp level.

Countercurrent type magnetic separator (CTN) characteristics advantages: with a higher recovery rate, suitable for fine-grained (0-1.5mm) strong magnetic minerals roughing and scavenging operations. Disadvantages: to get lower concentrate grade. Because coarse-grained material easy to plug the sorting room, so countercurrent-type magnetic separator does not be suitable for dealing with coarse-grained materials.

Advantages of half-countercurrent type magnetic separator (CTB) characteristics: to get high-quality iron ore concentrate, and better recovery, it is suitable for processing 0.5-0mm of the mineral particles, so half-countercurrent magnetic separator is widely used in different kind of industry.

Wet drum magnetic separator magnetic component
Wet Drum Separator Permanent magnetic system, using high-quality ferrite and rare-earth magnet material to be composited, the average tube surface magnetic flux density of 100 ~ 600mT (1000Gauss-6000Gauss). Wet drum magnetic separator mainly made up of the permanent magnet cylinder, roller, magnetic system, tank, transmission parts 5 parts.

Working principle:
When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.

Sketch map:

Wall PTC Heater

Ceramic wall heaters get the name from the constructions of the PTC heating element, which is made of ceramic and Aluminum that conducts heat very good. Electric Ceramic Heater with Over Heat Protection, 2 Heat Settings, Quick Heat up for Home and Offices.

Wall-mounted Ceramic heater use a much smaller PTC heating unit, and a surface area for the device that can be relatively tiny and thing, yet wide.

We have PTC wall heater with Erp program.

Welcome to OEM

thanks

Ptc Wall Mounted Heater,Ptc Wall Heater,Room Heater Fan,Heating And Cooling Fan

Fenry Manufacturing Co., Ltd , https://www.fenry-fan-heater.com