Embedding and fixing anchor bolts

Such as: the embedding and fixing of anchor bolts

The embedding work of the anchor bolts is carried out simultaneously with the construction of the foundation steel bars. The corresponding longitudinal and transverse axes are released by means of the mould line, and at the same time the position of each set of anchor bolts is released on the base steel bar with a steel ruler. Firstly, the anchor bolt plate is laid on the position marked on the base steel bar. The vertical and horizontal axes and the vertical and horizontal axis marks marked on the sleeve are measured by a wire hammer, and the steel bars are marked along the periphery of the sleeve. Pass the screw of the anchor bolt through the sleeve from bottom to top, screw on and adjust the nut tension and the top elevation of the anchor bolt to meet the drawing requirements (the level gauge can be measured by the level gauge).

Note: During the construction process, the level plate can be used to detect the sleeve and the screw to make the surface of the plate in a horizontal state, and the screw is in a vertical state. For fixed anchor bolts, it is necessary to weld each bolt screw with 8 steel bars, and use the electric welding to link the lower part of the screw to the base steel bar to ensure the accuracy of the anchor bolt position. After the welding is completed, loosen and adjust the nut on the sleeve so that the distance between the bottom of the sleeve and the base surface is 30cm. The concrete protection layer is also placed between the bottom of the sleeve and the base reinforcement. Use a leveling ruler to adjust the sleeve to make it as horizontal as possible, then tighten the nut on the top of the screw.

Hebei Zhongtong Pre-embedded Parts Factory, specializing in the production of embedded parts, railway embedded parts, high-speed rail embedded parts, steel plate embedded parts, flange steel plates, positioning steel plates, positioning steel gaskets, flanges, positioning flanges, Anchor bolts, U-bolts, welcome to inquire!

Handan Yongnian District Zhongtong Power Fittings Co., Ltd. specializes in embedded parts, railway embedded parts, high-speed rail embedded parts, steel plate embedded parts, etc. Welcome to call 17743319789