In summer, due to external factors such as high temperature, it is easy to cause some accidents during the transportation of oil tankers , such as the common occurrence of oil leakage, electrostatic discharge, and equipment failure, some of which are not appropriate. The operation can easily lead to accidents, and the consequences of not handling them in time can be disastrous. Therefore, in the summer when the car transport must have the necessary safety knowledge, prevention work can be effective to ensure the safety of the tanker transport!
Through long-term observation and summary of the tanker , it was found that the main location of static electricity generated by the tanker is in pipelines, filters and pumps. When the tanker is pumping oil, the charge generated by the fuel tanker is normally under normal conditions. The quantity will remain around a few degrees. After the tanker, the electricity consumption has increased dramatically, which means that the position of the static electricity is on the filter. If the tanker starts loading and unloading without grounding, the tank body The voltage is very high, so grounding is important.
The second is that the tanker must extend the crane pipe to the bottom of the tanker tank when loading oil, and the distance between the bottom and the nozzle is maintained at about 20 cm. When filling, it is necessary to pay attention to the initial speed control within one meter per second. When the oil outlet has been completely immersed, you can gradually increase the flow rate, but also pay attention to not too fast, or splash will also produce Electrostatic accident.
When transporting and loading and unloading tanker trucks must pay attention, the friction between the staff and the vehicle and between the vehicle and the object is very likely to cause static electricity. In particular, electrostatic discharges are also formed during transportation. At this time, it is very easy to cause accidents after encountering some flammable and explosive oil vapors. Therefore, it is advisable for tanker workers to wear work clothes and shoes that can prevent static electricity during the work process. Only operating in accordance with these specifications can effectively prevent accidents.
RUNDE speciallized in bronze fittings,covered end feed and solder type and the flange,Bronze Fittings.well known as yorkshiire bronze fittings,pegler bronze or gunmetal fittings as well as connex bronze fittings
bronze fittings,Yorkshire bronze fittings,Pegler bronze fittings,gunmetal fittings
Taizhou Runde Company , https://www.zjbrassfittings.com