The Hong Kong Institution of Engineers' Control, Automation and Instrumentation Division and the Visiting Delegation of the Royal Chartered Institute of Measurement and Control (Hong Kong Branch) made a special visit to the Guangdong Provincial Institute of Automation on January 15, 2011.
Leaders of the Hong Kong delegation Leaders of the Guangdong Provincial Institute of Automation and leaders of the Institute of Automation of the Guangdong University of Technology Leaders of the Guangdong Provincial Institute of Automation Liu Yuhua and other leaders of the Institute and Chairman of the Control, Automation and Instrumentation Division of the Hong Kong Institution of Engineers and the Royal Institute of Chartered Measurement and Control (Hong Kong) The president, Professor Le Facheng, conducted a full interactive discussion on further strengthening the cooperation and exchanges between Guangzhou-Hong Kong automation technology. Presented by Guangdong Provincial Institute of Automation: Wang Qinruo, Wu Guoping, Huang Yaoliang, Liu Liansheng, and Song Jianhua Consultant, Vice President Wan Fan, School of Automation, Guangdong University of Technology, etc., Vice Chairmen Huang Jing, Deng Shengsen, He Jianlian from the Hong Kong Institution of Engineers' Control, Automation and Instrumentation Department Prof. Ma Jinhan, Treasurer and Zhong Huming, and the Royal Chartered Institute of Measurement and Control (Hong Kong Branch), Mai Shulin, and Treasury Secretary attended the ceremony.
The discussion of the talks was chaired by the Director of the Guangdong Provincial Institute of Automation Liu Yuhua. The two sides respectively introduced the overall development of their respective societies in 2010. President Liu Yuhua said that in recent years, the Guangdong Institute of Automation has been particularly close to the academic and academic exchanges with Hong Kong and Macau, and has established the relevant reciprocal visit mechanism with the Hong Kong Institution of Engineers' Control, Automation and Instrumentation Department. The current cooperation is good. He mentioned that the Guangdong Institute of Automation is one of the most dynamic institutes in the domestic automation and provincial institutes, and one of the six reform pilot institutes established by the Guangdong Provincial Association for Science and Technology. It has established the Guangdong Institute of Automation to communicate in Hong Kong. The station is a good attempt and reform. He hoped that the cooperation with the Hong Kong-Guangdong automation disciplines such as the Control, Automation and Instrumentation Division of the Hong Kong Institution of Engineers and the Royal Institute of Chartered Measurement and Control (Hong Kong Branch) could truly become the bridge, link and window of the two places, thus promoting the automation of Guangdong and Hong Kong. The application of disciplines and academic exchanges and automation technology will promote the economic development of Guangdong and Hong Kong.
After mutual interaction and full discussion between the two parties, the Guangdong Institute of Automation and the Royal Institute of Chartered Measurement and Control (Hong Kong Branch) signed a cooperation memorandum. In his speech, the Chairman of the Board of Directors Liu Yuhua said: The two parties signed a memorandum of cooperation, which signifies that the cooperation between the two parties has entered a substantive stage and will lay a good foundation for the exchange mechanism of the automation counterparts in the two places. It is expected that the academic exchanges and technical exchanges between the two places will be automated. The international integration of talent training information services and resource integration cooperation and mutual recognition of titles has taken an important step towards more extensive and substantive cooperation.
Both Hong Kong and Hong Kong signed a memorandum of cooperation. Hong Kong experts such as the Chairman of the Control, Automation and Instrumentation Department of the Hong Kong Institution of Engineers and the President of the Royal Chartered Institute of Measurement and Control (Hong Kong) (Hong Kong Branch) Professor Le Facheng and others from the Institute of Automation of Guangdong University of Technology The president presided over a splendid report meeting and gave a speech. Prof. Le Facheng introduced the operation of the Hong Kong Nanxun Power Plant and the Hongkong Electric Co., Ltd. project, taught the students the experience of zero accidents, and introduced the five-day method. His sensibility and humor infected everyone in the audience. The students who were quoting from time to time gave applause. The students also took this opportunity to actively ask Professor Le. Professor Deng Shengsen made a report on "Professional Education in Hong Kong" to his classmates. He pointed out that education is very different because of different social development and needs. He encouraged his classmates to read thousands of books, but also to go for thousands of miles, to learn more about the new information, to know each other, and to fight against each other. Prof. He Jianlian gave a brief report to the students on Employment Situation of Hong Kong Graduates. He mentioned that the qualifications of Hong Kong and the Mainland may gradually recognize each other from 2012 onwards. At the same time, he also mentioned that mainland students need to pay attention to local employment when they think of employment in Hong Kong. More than 150 teachers and students attended the meeting and the report was very hot.
Leaders of the Hong Kong delegation Leaders of the Guangdong Provincial Institute of Automation and leaders of the Institute of Automation of the Guangdong University of Technology Leaders of the Guangdong Provincial Institute of Automation Liu Yuhua and other leaders of the Institute and Chairman of the Control, Automation and Instrumentation Division of the Hong Kong Institution of Engineers and the Royal Institute of Chartered Measurement and Control (Hong Kong) The president, Professor Le Facheng, conducted a full interactive discussion on further strengthening the cooperation and exchanges between Guangzhou-Hong Kong automation technology. Presented by Guangdong Provincial Institute of Automation: Wang Qinruo, Wu Guoping, Huang Yaoliang, Liu Liansheng, and Song Jianhua Consultant, Vice President Wan Fan, School of Automation, Guangdong University of Technology, etc., Vice Chairmen Huang Jing, Deng Shengsen, He Jianlian from the Hong Kong Institution of Engineers' Control, Automation and Instrumentation Department Prof. Ma Jinhan, Treasurer and Zhong Huming, and the Royal Chartered Institute of Measurement and Control (Hong Kong Branch), Mai Shulin, and Treasury Secretary attended the ceremony.
The discussion of the talks was chaired by the Director of the Guangdong Provincial Institute of Automation Liu Yuhua. The two sides respectively introduced the overall development of their respective societies in 2010. President Liu Yuhua said that in recent years, the Guangdong Institute of Automation has been particularly close to the academic and academic exchanges with Hong Kong and Macau, and has established the relevant reciprocal visit mechanism with the Hong Kong Institution of Engineers' Control, Automation and Instrumentation Department. The current cooperation is good. He mentioned that the Guangdong Institute of Automation is one of the most dynamic institutes in the domestic automation and provincial institutes, and one of the six reform pilot institutes established by the Guangdong Provincial Association for Science and Technology. It has established the Guangdong Institute of Automation to communicate in Hong Kong. The station is a good attempt and reform. He hoped that the cooperation with the Hong Kong-Guangdong automation disciplines such as the Control, Automation and Instrumentation Division of the Hong Kong Institution of Engineers and the Royal Institute of Chartered Measurement and Control (Hong Kong Branch) could truly become the bridge, link and window of the two places, thus promoting the automation of Guangdong and Hong Kong. The application of disciplines and academic exchanges and automation technology will promote the economic development of Guangdong and Hong Kong.
After mutual interaction and full discussion between the two parties, the Guangdong Institute of Automation and the Royal Institute of Chartered Measurement and Control (Hong Kong Branch) signed a cooperation memorandum. In his speech, the Chairman of the Board of Directors Liu Yuhua said: The two parties signed a memorandum of cooperation, which signifies that the cooperation between the two parties has entered a substantive stage and will lay a good foundation for the exchange mechanism of the automation counterparts in the two places. It is expected that the academic exchanges and technical exchanges between the two places will be automated. The international integration of talent training information services and resource integration cooperation and mutual recognition of titles has taken an important step towards more extensive and substantive cooperation.
Both Hong Kong and Hong Kong signed a memorandum of cooperation. Hong Kong experts such as the Chairman of the Control, Automation and Instrumentation Department of the Hong Kong Institution of Engineers and the President of the Royal Chartered Institute of Measurement and Control (Hong Kong) (Hong Kong Branch) Professor Le Facheng and others from the Institute of Automation of Guangdong University of Technology The president presided over a splendid report meeting and gave a speech. Prof. Le Facheng introduced the operation of the Hong Kong Nanxun Power Plant and the Hongkong Electric Co., Ltd. project, taught the students the experience of zero accidents, and introduced the five-day method. His sensibility and humor infected everyone in the audience. The students who were quoting from time to time gave applause. The students also took this opportunity to actively ask Professor Le. Professor Deng Shengsen made a report on "Professional Education in Hong Kong" to his classmates. He pointed out that education is very different because of different social development and needs. He encouraged his classmates to read thousands of books, but also to go for thousands of miles, to learn more about the new information, to know each other, and to fight against each other. Prof. He Jianlian gave a brief report to the students on Employment Situation of Hong Kong Graduates. He mentioned that the qualifications of Hong Kong and the Mainland may gradually recognize each other from 2012 onwards. At the same time, he also mentioned that mainland students need to pay attention to local employment when they think of employment in Hong Kong. More than 150 teachers and students attended the meeting and the report was very hot.
Oxygen Sensor For Audi,Audi Oxygen Sensor,Audi Lambda Sensor,Audi 02 Sensor
RUIAN XIANGTAI AUTOMOTIVE PARTS CO ., LTD , https://www.raxiangtais.com