For our friends who are about to buy used cars, buying a used car that is satisfactory is very important to each of us. In the trading market, there will be some accidental vehicles that have been simply renovated. Some unscrupulous merchants can use this method to obtain a lot of benefits. Therefore, people who buy used cars must pay attention to how to learn to identify accident vehicles.
First of all, the most direct way is to inspect the appearance of the car body, and at the same time check whether the paint behind the door and the window has undulations. Of course, we must also look at whether the paint on the surface of the car is even and even. If you find a very uneven, it is very likely that the accident car was renovated. Of course, if we want to further determine the quality of this car, the best way is to open the hood, and then feel with hand to see if the edge of the hood is flat and straight. Is it smooth? If it is smoother, it means that the car is a real used car. Of course, if you go further, you can also observe some of the welding points in these parts of the tank frame. The characteristics of the original welding point of view, their welding point is very flat, and there is not much highlight. If the welding is very irregular, it is likely to be an accident car.
In addition, we must also observe the chassis of the vehicle. If it is an accident car, then the chassis of this car is very uneven, and some parts will be deformed, making the entire car chassis very distorted. At the same time, we also need to look at the overall color of the site. If the overall colors are the same, then it means that there has been no special processing and processing. This kind of vehicle is worth our choice.
Of course, we must carefully observe the various parts of the chassis, especially at each welding point. If it is a new sign, this time it is necessary to pay attention, it must be handled in the near future, such used cars are generally accident vehicles. This is Xiaobian's discussion on the used vehicle identification method. He hopes that there will be more standard guidance for every friend who is about to start a used car.
Sawdust dryer with heating furnace, feed port, rotating cylinder, delivery pipe, dust collector and discharge port. Wet material is continuously sent to the drying cylinder by a conveyor. Heat air makes full contact with the material. Being delivered and scattered by the high-speed hot air, water in the wet material is evaporated. The material gets fully dried in the rotating cylinder.
Sawdust dryer is widely used in industries like biomass fuel, charcoal making, wood pellet fuel, sawdust briquette, farming and sand etc. The applicable materials are wood powder, wood shavings, sawdust, wood chipps, straws, grass, sand, etc
Rotary Drum Dryer,Biomass Rotary Dryer,Sawdust Drum Dryer,Drum Rotary Dryer
Shandong Kingoro Machinery Co., Ltd , https://www.kingoromachine.com