The prevention and control of pests should follow the principle of “prevention first, comprehensive preventionâ€. Before carrying out pest control, fully understand the occurrence and development of pests, which is the basis for the prevention and control of pests and the promotion of green development of agriculture. The measurement of insects has relied on people in the past, but now it relies on measuring instruments. The installation of pest detection and reporting lights everywhere, the insects are reported one step ahead, and played an important role in strengthening the monitoring and early warning of insects and improving the level of green control of pests.
The insect detection lamp can be said to be one of the indispensable tools for the current agricultural and forestry departments to carry out the monitoring of insects. Compared with the traditional method of measuring and reporting, the insect detection lamp has a high degree of automation, automatically turns on the lights at night, and automatically turns off the lights during the day. Automatic trapping and processing, collecting pests, in the process of its work, almost no manual intervention, easy to operate, significant trapping effect, stable performance and energy saving and environmental protection, not only saves effort and effort, but also monitors in time. In addition, the intelligent insect detection light also supports automatic photo uploading, online viewing and identification analysis, etc., providing strong technical support for further strengthening the monitoring and early warning of agricultural and forestry pests.
As an effective tool for monitoring and trapping of agricultural and forestry pests, insect detection and reporting lamps are applied to the reporting and prevention of agricultural and forestry pests, effectively improving the comprehensive prevention and control level of pests in agriculture, forestry and forestry. Through the promotion and application of the insect test light, the advantages of the insect test light have become increasingly prominent. The plant protection department applied the instrument to carry out the work of measuring the situation of the insects in an orderly manner. The insects were reported one step at a time. Through the regular implementation of the pest detection and reporting work, the pest information was collected effectively, and the dynamic occurrence of agricultural pests was grasped in time, and the information of the insects was obtained. It is applied to pest control guidance, adopts effective prevention and control plans and measures, and is easy to obtain good prevention and control feedback, timely curb the occurrence and development of pests and diseases, control the damage caused by pests and diseases, ensure the normal growth and development of crops, and reduce the losses caused by crop diseases and insect pests. , to provide a strong guarantee for agricultural production.
Silicone mould is a special mold for making crafts. According to performance, the raw materials of glue can be divided into ordinary silicone and weather silicone. The characteristics of silicone are high temperature resistance, corrosion resistance, strong tear resistance, high simulation precision, and it is used to make various handicrafts mold.
Mold should be made in time after the silicone is matched. Pour the glue on the highest part of the mold in a trickle, let it flow naturally, brush it in place with an oil paintbrush where the flow is not in place, if it is a piece of silicone, not only fill the entire product, but also brush the glue evenly. Each product should be brushed with at least three layers of silicone. The thickness of each layer of silicone is 1mm. In the process of brushing the silicone, each layer is required to be cured before the other layer can be brushed. When brushing the third layer, add one layer on top of the second layer. The thickness of the silica gel part of the whole mold is controlled in 3-4mm according to the different requirements of the size of the product, and the width is not greater than 60 mm of the product width. The time for the silicone to set is 20 minutes.
Silicone Injection Molding, Moulding Silicone, Rubber Molds, Rubber Mold Making
Sung Precision Mould & Plastic Co., Ltd. , https://www.dginjectionmolding.com