Lb-UV Industrial Exhaust Gas Purifier

Model NO.: LB=PUV
HS Code: 84219990
Model NO.: LB=PUV
HS Code: 84219990
Loobo LB-UV Industrial exhaust gas purifier

UV light generate the O3 
Activated carbon absorb 

 

Product performance:

1,high efficient : can efficiently remove volatile organic compounds (VOC), inorganic matter, the main pollutants, such as hydrogen sulfide, ammonia, mercaptan and various stench, purification, deodorization efficiency as high as 99% above, purification, deodorization effect considerably more than the 1993 issued odorous pollutants emission standards (GB14554-93).

2, without adding any material: only need to set up the corresponding exhaust pipe and exhaust the power, the industrial waste gas decomposition by this equipment to make sure, without adding any material involved in chemical reactions. ,

3, strong adaptability, can adapt to high concentration, big volume, the purification of different industrial waste material, can work 24 hours a day, stable and reliable running.

4, low running cost: this equipment is without any mechanical action, no noise, no need for personnel management and daily maintenance, only need to regularly check, this equipment is low energy consumption, (each handle 1000 cubic meters/hour, only consumes about 0.2 degree electricity), equipment wind resistance is extremely low < 50 pa, can save a lot of wind power energy consumption.

5, without pretreatment, the pretreatment of the need for special industrial emissions, such as heating, humidification, equipment working environment temperature in Celsius - 30 ºC to 95 ºC, humidity from 30% to 98%, PH value between 3-11 all can normal work.

6, Occupy small area, light weight, suitable for special conditions, such as narrow compact layout, site equipment covers an area of < 1 square meters / 10000 m3 / h air volume.

7, high-quality imported materials, fire prevention, anti-corrosion performance is high, stable performance and long service life.

8, environmental protection high-tech patent products: adopt the most advanced technology concept, and our company engineering and technical personnel through the expert long-term repeated experiment, development developed, with completely independent intellectual property rights of high-tech environmental purification products, can be thoroughly decompose toxic and harmful substances in industrial waste gas, and can achieve perfect purification effect, after the decomposition of gas, can achieve completely harmless emissions, not produce secondary pollution, at the same time to achieve efficient disinfection sterilization effect.


Scope of application: Oil refineries, rubber factory, chemical plant, pharmaceutical factory, the stench gas such as sewage treatment plant, waste transfer station, industrial waste gas purification treatment.

 

Technical principle:

1, this product with a special high energy ozone UV ultraviolet cracking waste gas, , such as ammonia and trim ethylamine, hydrogen sulfide, hydrogen sulfide and methyl mercaptan, methyl sulfide, diethyl disulfide, carbon disulfide and styrene, sulfide H2S, VOC, molecular chain structure of benzene, toluene, xylene, organic or inorganic polymer odorous compounds molecular chain, under high energy beam exposure to the sun's ultraviolet rays, degraded into low molecular compounds, such as CO2, H2O, etc.

2, high using high-energy UV ultraviolet light decomposition of ozone in the air molecules to produce free oxygen, namely reactive oxygen species, with electron-positron imbalance by free oxygen so need to combine with oxygen, which produce ozone.

UV + O2 - O - + O * (ros) O + O2 and O3 (ozone), known as the ozone oxidation of organic matter with a strong, for industrial waste gas and other irritating odor have immediate removal effect.

3, industrial waste gas after using the exhaust equipment input to the purification equipment, purification equipment using high-energy UV ultraviolet light and synergy on industrial waste gas decomposition of ozone oxidation reaction, make its degradation into industrial waste material of low molecular compounds, water and carbon dioxide, and then through the exhaust pipe outside.

4, the use of high-energy UV light beam cracking bacteria in industrial waste gas molecular bonds, destroy bacteria nucleic acid (DNA), and then through the ozone oxidation reaction, thus achieve the goal of purification and kill bacteria.

 

Technical Parameter:

 

Industrial waste gas UV photolysis purification equipment

The lamp specification=800MM;Power:150W/pc


Voltage:220v/50hz

Model

Airflow(m3/H)

Power(Kw)

Lamp Q'ty

Dimension

In and outlet

LB-UV-1000

1000

0.9

6

1280

980

780

150

LB-UV-2000

2000

1.8

12

1280

980

880

250

LB-UV-4000

4000

3

20

1640

980

880

300

LB-UV-5000

5000

3.6

24

1640

980

880

300

LB-UV-6000

6000

4.8

32

2000

980

880

400

LB-UV-8000

8000

6

40

2000

980

1030

500

LB-UV-10000

10000

7.5

50

2360

1080

1130

500

LB-UV-12000

12000

9

60

2000

1100

2000

/

LB-UV-15000

15000

12

80

2200

1100

2000

/

LB-UV-20000

20000

15

100

2500

1100

2000

/

 Model

Airflow (m³/h)

Lamp QTY

Body Size(mm)

Total weight(kg)

L

W

H

LB-PUV-8

1500-2000

8

750

1200

1250

103.15

LB-PUV-16

3000-4000

16

1250

1200

1250

156.3 

LB-PUV-24

5000-6000

24

1750

1200

1250

209.4 

LB-PUV-32

6500-7500

32

2250

1200

1250

262.5 

LB-PUV-40

8000-9000

40

2750

1200

1250

315.6 

LB-PUV-48

9000-11000

48

3250

1200

1250

368.7 

LB-PUV-56

11500-14000

56

3750

1200

1250

421.8 

LB-PUV-64

13000-15000

64

2250

1200

2300

411

LB-PUV-80

15000-19000

80

2750

1200

2300

Home Appliances Injection Molding Parts

With many years of industry production experience, we can process and order according to drawings and samples, source manufacturers, quality assurance, complete specifications, high-quality after-sales service, modern complete sets of production equipment and superb workforce, with an annual production capacity of nearly 1,000 tons. Liquid silicone vulcanization molding equipment, injection molding process, extrusion/extrusion,
Specializing in the production of medical registration accessories, quality assurance, injection molding products, using exquisite craftsmanship, supporting customization, we require every product to have excellence and tough quality. Why choose us? We have a professional team of engineers and sales teams, most of whom have more than 10 years of experience in the mold industry and injection molding industry, especially in the medical, electronic and automotive industries. We have high-quality equipment machines, such as 4-axis and 5-axis CNC machines, which provide stable and precise machining capabilities.

Home Appliances Injection Molding Parts,Household Custom Plastic Injection Molding,Custom Size Plastic Injection Moulding Parts,Plastic Injection Moulding For Home Use

Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com