Nine strokes ensure longevity of vehicles

Nine strokes ensure longevity of vehicles The engine piston temperature is too high, easy to cause overheating and smelting and holding cylinder; rubber seals, triangle tape, tires and other overheating, premature aging, performance degradation, shorten the service life; engine, generators, regulators and other electrical equipment The coil is overheated, easily burned and scrapped. Many car owners are very cautious about choosing accessories, but it is easy to neglect the maintenance of the accessories after installation. In this way, the car accessories are very susceptible to wear and the life span is reduced when the car journey is gradually increased. The following provides you with nine major parts care precautions, only for the owner reference.

One of the "longevity" tips: avoiding heat

The engine piston temperature is too high, easy to cause overheating and smelting and holding cylinder; rubber seals, triangle tape, tires and other overheating, premature aging, performance degradation, shorten the service life; engine, generators, regulators and other electrical equipment The coil is overheated, easily burned and scrapped.

"Longevity" 诀 二: Avoid dirt

Parts such as fuel filters, oil filters, air filters, hydraulic oil filters, and various types of filters can result in poor filtration. Water tank fins, air-cooled engine blocks, cylinder head fins, cooler radiating fins, and other parts that are too dirty can cause poor heat dissipation and high temperatures.

"Longevity" 诀 诀 :: Avoidance

The cylinder pad of the engine can not be mounted reversely during installation, otherwise it will lead to premature ablation and damage of the cylinder pad; when the engine fan blade is installed, it can not be reversed; for the pattern-patterned tire, the herringbone pattern tire, after installation, should be made Chirp point to the back.

"Longevity" 诀 诀 : :: 避 避

Engine valve locks should be installed in pairs. Missing or missing valves will result in loss of control of valves and damage to the pistons; etc.; engine connecting rod bolts, flywheel bolts, cotter bolts mounted on driveshaft bolts, locking screws, and rupture discs. Spring washers and other anti-loosening devices, once they are installed, may cause serious problems during use.

"Longevity" 诀 五 : :: Oil

If the engine dry air filter paper filter is wetted with oil, it will easily draw a higher concentration of air into the cylinder, causing insufficient air, increased fuel consumption, and reduced engine power; if the triangular tape is wetted with oil, The corrosion aging will be accelerated; the brake shoes, the friction plates of the dry clutch, and the brake belt will be exposed to oil, which will threaten the driving safety.

"Longevity" 诀 六: Avoid wash

For the paper air filter of the engine, it cannot be cleaned with any kind of oil; for the leather parts, it is also not suitable for cleaning with oil.

"Longevity" 诀 seven: avoid pressure

If the tire casing is stored for a long time and is not turned in time, it will be deformed due to extrusion; the air filter and the paper filter of the fuel filter, if squeezed, cannot reliably play the role of filtration; Rubber seals, triangle tapes, tubing, etc. cannot be squeezed.

"Longevity" 诀 Eight: Avoiding Fire

Rubber products such as tires, triangle tapes, cylinder liners, rubber seals, etc., which are close to the source of fire, will easily deteriorate, deteriorate, or be damaged. On the other hand, they may cause fire accidents.

"Longevity" 诀 : : : : : :

Some parts are supposed to be used once, and individual drivers or repairmen are repeatedly used to save or because they do not understand the taboos. This can easily lead to accidents.

Environmental Cast Film Machine

Specifications and models Environmentally friendly film casting production line
Film Structure 357
Screw aspect ratio 32: 132:132:1
Screw direct 75:125:7575:75:90:75:7575:65:75:65:75:65:75
Mold width 250025002500
Finished product width 220022002200
Finished product thickness 0.03mm-0. 2mm0.03mm-0.2mm0.03mm-0.2mm
Maximum extrusion capacity 10 tons/24 hours 10 tons/24 hours 10 tons/24 hours
Mechanical design line speed 160160160
Total power 350KW365KW380KW
Environmental protection film casting production line
Mainly used in the production of biodegradable cast film products
PLA biodegradable cast film can be quickly and naturally decomposed under certain conditions, which is an inevitable trend in the future development of flexible packaging and is widely used as printing materials.
Materials, packaging materials, food daily chemical soft packaging materials, biodegradable coated paper, clothing packaging, etc.
1 PLA is a polymer composed of small lactic acid units (polylactic acid). Lactic acid is an organic acid that plays an important role in our daily life. we flat
The yogurt or anything with glucose can be converted into lactic acid, and the lactic acid of PLA consumables comes from corn, and the starch raw material extracted from corn
material made.
|The degradable film not only has the functions and characteristics of traditional plastics, but also can pass through the action of microorganisms in soil and water or through
The role of ultraviolet rays in the sun, split and degrade in the natural environment, and then re-enter the ecological environment in a reduced form, returning to nature. Domestic research
The varieties developed have covered photodegradation, photobiodegradation, photooxidative biodegradation, high starch content biodegradation, high calcium carbonate filled photooxidative degradation,
Fully biodegradable, etc. Among them, edible film and water-soluble film are more commonly used.
Hygienic Material Cast Film Machine

Environmental Cast Film Machine,Environmental Protection Cast Film Line,Biodegradable Cast Film Machine,Water Soluble Cast Film Machine

Baijia Mechanical Equipment (Huizhou) Co., Ltd. , https://www.castfilmmachine.com