Pond Copper Wire Self-Priming Auto Water Pump with Steel Casting

   Domestic Copper Wire Self-priming Auto Water Pump with Steel Casting

Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time. 
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure. 

Application

                                                                     
                                                      About Us
                                  


FAQ    Domestic Copper Wire Self-priming Auto Water Pump with Steel Casting

Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time. 
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure. 

Application

                                                                     
                                                      About Us
                                  


FAQ

Mobile Jib Crane

Jib cranes developed by EUROCRANE have multiple specifications and types.We are able to provide you with the best solutions no matter you have any special requirements for lifting weight,rotating angle,jib length and functions.Its range for load is from 80kg to 10000kg.It is widely used for material transportation in operating posts,especially in smaller operating area,to greatly shorten the handling time and improve the working efficiency.The mobile Jib Crane is a perfect solution for who needs flexible and light material handling.

Mobile Jib Crane,Portable Jib Crane,Movable Jib Crane,Floor Jib Crane

EUROCRANE GLOBAL , https://www.overhead-crane.com