Six Points to Pay Attention to when Using a Tank Truck

(1) First of all, we must understand the main structure, performance, and tanker functions of the tanker. The chassis of the special vehicle must go to the Dongfeng Second Automobile Service Station or the Liberation First Automobile Service Station as required to take the protection or repair;

(2) A tanker truck is usually composed of four parts: a special vehicle chassis (Dongfeng or Liberated Type II vehicle chassis), an oil tank body, a pipe network system, and a power take-off device;

(3) Every driver who drives a tanker truck must do a routine maintenance of the tanker. He must check, clean, tighten and add before, during, and after the departure to discover the tank in time. Car storage problems or security risks, so that timely detection of problems in a timely manner;

(4) Check whether the oil tank body, pipe network, valves, etc. are leaked or leaked before exiting the vehicle. Whether the upper cover is properly covered or not, the amount of lubricating oil, the amount of fuel oil, cooling water, the braking of hands and feet, and the steering device , Meters, lights, tire pressure, tire nuts, etc.

(5) Problems that driver's friends should pay attention to while driving the tanker:

1. The tanker checks the working conditions of each instrument while driving;

2. Whether the tanker checks the steering system during driving is normal;

3. The inspection of the hand and foot brakes of the tanker during driving is abnormal;

4. When the tanker is in motion, check whether the engine, chassis, and oil tank body are abnormal noises and unusual odors during running.

5 , make use of the parking time to do the following inspection work of the tanker: touch the front and rear wheel brake drum with or without overheating, check the tightness of the tires and nuts, remove the inclusions in the tire tread, check for oil leakage, Leakage, leakage, check the condition of the leaf spring, if the drive shaft bolt is loose, check the appearance of the tank body and the pipe network system of the tanker;

(6) Tankers regularly go to the Dongfeng No. 2 Auto Service Station and Liberate FAW Service Station to do the chassis maintenance and maintenance work; they are particularly reminded of the drivers’ friends that they must strengthen the daily maintenance of the tanker and regularly check and change the car. Fire extinguisher in case of accident.

EDM Graphite

EDM graphite, also known as graphite block for EDM, is a new type of material, which is now more and more widely used in the precision mold processing industry. At present, in mold processing plants in developed European countries, more than 90% of mold processing electrode materials are graphite. Copper, the once dominant electrode material, has almost lost its advantages compared with graphite electrodes.

Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.

Edm Graphite,Graphite Block For Edm,Edm Graphite Electrodes,Isostatic Graphite Column

CARBONS TECH&CREATION(HENAN) INDUSTRY CO.,LTD , https://www.kycarbon.com