Most buyers are not familiar with the issue sweeping cars are most concerned about, sweeping vehicles a day about how much sweeping the area. The following is a work experience and related data provided by a sanitation worker.
According to the introduction of workers from the Harbin Municipal Sanitation Department, they would have to take a broom and go to the streets. A few hundred meters long that one person was responsible for would take about three hours to sweep away, sweeping away all the dust, and changing masks two or three times. . It is now much better than before. Streets basically use mechanical sweepers , street flushes, and sweeps. These processes can be completed in more than 10 minutes by a suction sweeper. She is only responsible for sweeping machines.
The working time of sweeping vehicles is usually 3 to 7 o'clock, 12 o'clock to 20 o'clock and 20 to 22 o'clock everyday. The sweeping of the corners that can't be swept by sweeping vehicles is done manually. 3 times efficiency. Wang Yong, deputy director of the Harbin Municipal Environmental Hygiene Office, told us that each sanitation worker's cleaning area is between 4,000 and 5,000 square meters, and a new type of sweeping vehicle can clean tens or even tens of thousands of square meters per day, improving the efficiency of work. It also improves security.
Frame hydraulic presses are suitable for stamping, forming, shallow drawing, shaping, overmolding and trimming of metal or non-metal parts. Typical products that can be pressed include case, strap, eyeglass frame and parts, picture frame, tableware, Signs, locks, hardware parts, etc.
(1) The frame type hydraulic press adopts the integral steel plate welded frame type frame, which has good overall rigidity and high compressive strength;
(2) Pressure can be pressed to control the process requirements;
(3) After clamping, the pressure is fast, and the rated pressure is only 1 second;
(4) It is convenient to replace and clean the cylinder with the lower-mounted cylinder for the frame type hydraulic press;
(5) It has different derivative models such as lower top material, upper top material and upper and lower composite top material.
Sheet Metal Deep Drawing, 4 Column Hydraulic Press For Kitchenware , 4 Column Hydraulic Press For Tableware
CHENGDU ZHENGXI HYDRAULIC EQUIPMENT MANUFACTURING CO., LTD. , http://www.zxhydraulic.com