The classification of magnetic particle flaw detector o1, according to the different direction of magnetization of the workpiece, can be divided into circumferential magnetization method, longitudinal magnetization method, composite magnetization method and rotational magnetization method.
2, according to the use of different magnetizing current can be divided into: DC magnetization method, half-wave DC magnetization method, and AC magnetization method.
3, according to the detection of magnetic powder used in the preparation of different, can be divided into dry powder method and wet powder method.
The characteristics of magnetic particle flaw detectors employ a number of techniques to form induced magnetic fields, which are extremely versatile;
Controller and solid state electronics as one of the high-performance portable instrument;
Fixed AC or DC magnetic field for the detection of surface and near surface defects;
High-energy magnetic field can be concentratedly applied to the detection area to quickly and accurately find material defects;
Small size, light weight and reliable, use dry powder and wet fluorescent powder;
Magnetic pole can apply AC or DC magnetic field to the detection area of ​​various shapes of workpieces, no arc burn;
The scope of application of magnetic particle flaw detector o1, is suitable for detecting the surface and near surface of the ferromagnetic material workpiece size is very small, very narrow gap cracks and visually difficult to see the defects.
2. It is suitable for the detection of martensitic stainless steels and precipitation hardened stainless steels. It is not suitable for testing austenitic stainless steels.
3. Applicable to the detection of unprocessed raw materials (such as the blank) and the processed semi-finished products, finished parts and in-service and used workpieces.
4. It is suitable for the testing of steel and forged steel castings and welded parts for pipe and bar materials.
5, used to detect defects on the surface and near the surface, but not for the detection of shallow and wide defects on the surface of the workpiece, deeper buried internal defects and the direction of the direction of the magnetic flux and the included angle of less than 20 degrees.
Copper Plating Production Line
Metal electroplating line is widely used in aircraft and auto parts, machinery parts, metal, hardware processing industries, including cooper plating, silver plating, zinc plating, nickel plating, gold plating, chrom plating, anodizing, electrophoresis production line,etc.
Copper plating is one of the most widely used pre-plating layers in the electroplating industry, including soldering parts, lead-tin alloys, and zinc die-casting parts that must be plated with copper before nickel, gold, and silver are plated to improve the bonding force of the plating.
Copper plating is an important part of the protective decorative plating copper/nickel/chromium system. The flexible copper plating with low porosity plays an important role in improving the adhesion and corrosion resistance of the plating.
In order to complete the collective name of all electroplating equipment in the electroplating process of industrial products, the electroplating process must be completed in sequence. The Electroplating Production Line is also called the electroplating assembly line.
Copper Plating Production Line,Copper Plating Line,Copper Electroplating Line,Automatic Copper Production Line
Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.wxxingyi.com