2. The command signal is not clear and does not hang;
3, bundled, hanging loose or unbalanced, may cause slip does not hang;
4. Not hanging when someone is hanging or floating.
5. The structure or parts have defects that affect safety work or do not hang when damaged;
6. Do not lift the embedded object when it is not clear;
7. The workplace is dark, and it cannot be seen when the ground, hanging objects and command signals cannot be seen;
8. When the edges of the objects to be lifted are not padded with the binding wires, they are not lifted;
9, do not hang when pulling a heavy load;
10, crane insurance device is not complete, not reliable and not hanging;
11, where there are high-voltage lines can not work; 12, cloudy wind and rain can not work;
If the drive axles are rigidly connected,that is ,if the drive axles are running at the same speed all the time ,the car will have no diffculty turning.Because the car in thecorner before and after the rotation speed of the drive shaft may be different,if forced to rotate at the same speed,then it will cause power loss in the drivetrain,tesulting in engine power consumption,increase fuel consumption and tire wear,reduce drivetrain life,With the differential between axles,the front axle and the rear axle of the car can rotate at different speeds,so that the car is more free and smooth,and improve the traction of the car,through and stability.
Rear Axle Assembly,Parts Of Differential Assembly,Differential On A Car,Rear Axle Differential Assembly
Jilin Province Xuan Yi Trading Co.,Ltd. , https://www.jlxytruckparts.com