Wuhan Petrochemical Co., Ltd. 1.2 Million Ton/year Coking Unit Successfully Put into Production

After 14 months of construction, on June 16, the new 1.2 million tonne/year delayed coking unit of Wuhan Petrochemical Company was successfully put into operation.
The 1.2 million-tonne/year delayed coking unit is the second unit that was successfully put into operation after the new atmospheric pressure unit in the first phase of the new installation of 8 million tons of oil quality upgrading and refining of Wuhan Petrochemical Company. In order to achieve technology leadership, significant benefits, and cost savings, the device uses a number of advanced technologies at home and abroad. Its completed and put into operation will not increase the physical processing capacity and economic efficiency of Wuhan Petrochemical. After the production is officially put into operation, the liquefied gas yield will reach 70%; the sulfur dioxide content in the heating furnace fuel gas will be reduced by 50% compared with the past, and the cold coke water will be sealed and deodorized, and all the waste oil will be recovered. This will enable the plant to be clean and environmentally friendly. During the installation of the equipment, Zhang Jianhua, senior vice president of Sinopec Group Corporation, and Zhang Kehua, vice president of the Sinopec Group have visited the site to inspect and guide their work.
Since the device was implemented on April 11th, the Wuhan Coking Coking Plant overcame the difficulties of equipment and technical problems, and stayed on the scene day after day. It completed the purge, water flushing, stove baking and steam pressure testing. , oil and other transportation start steps. On June 13th, the device was heated up and the "three towers" cycle was established. The smooth switching of the four-way valve on the 14th marked the official transfer of the new coking unit. With the coke tower officially out of focus at 21 o'clock on the evening of the 16th, the device was declared successful.

Aluminum round Cake Pan set is make of heavy gauge aluminum steel without any harmful chemical material or toxic coating chipping off into your food, Great replacement for other cheap baking pans, Healthy for your daily baking use. 
Full sides all around help to keep food contained without any leakage and ensure cakes perfectly come out, The cake pans are solid constructed to avoid deformation, Ensure rust resistant, Spread heat evenly, Sturdy and durable to last for a long service life
Smooth surface and edge without sharp angles for comfortable holding, 2-inch straight side is conducive to uniform cakes for easily cutting and making layer cakes
The round cake pan is dishwasher safe to save your cleaning labor, Easy clean in a breeze by hand with no dead corner, As shiny as new after washing

Aluminum Cake Pans

Round Cake Pan Set,Cake Baking Tray,Deep Dish Cake Pan ,Aluminum Cake Pan

YANGZHOU GNEWY MACHINERY EQUIPMENT CO.,LTD , https://www.gnewy.com