2017 Brand New Copper Wire Granulator for Sale

Features: 
This copper wire granulator for sale is used for recycling scrap copper wires and cables, like automobile wires, telecommunication wires, and other kinds of copper wires, in order to recover copper. This copper wire granulator for sale is consisted of Crusher, Crushed Material Channel, Vibrating Separator, Air Blower, Dust Collector, and the Underbed, etc..

Application: 
copper wire granulator machine is used for crushing copper cable and seperating them.  
Applicable copper wires: 
 

Processing Procedures:

1. Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2. The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3. The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4. All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.

Features: 
This copper wire granulator for sale is used for recycling scrap copper wires and cables, like automobile wires, telecommunication wires, and other kinds of copper wires, in order to recover copper. This copper wire granulator for sale is consisted of Crusher, Crushed Material Channel, Vibrating Separator, Air Blower, Dust Collector, and the Underbed, etc..

Application: 
copper wire granulator machine is used for crushing copper cable and seperating them.  
Applicable copper wires: 
 

Processing Procedures:

1. Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2. The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3. The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4. All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.

This series of grinders are used to grind the outer ribs of single or double-row cylindrical roller bearings.

1.Adopting double-point diamond pen for dressing of the wheel automatically. The section of wheel is a shape of herringbone and double ribs and quadruple ribs can be fit in the fixture at same time and grinding separately. Using two conic faces of the herringbone wheel, it can grind the two ribs in the front and back of the raceway separately. In order to avoid burn of grinding face, a small reciprocating grinding for workpiece can be used simultaneously.

2.AC servo motor drive is used for the carriages of the workpiece and grinding support. With the support of cross roller rail, a micro-oscillation can be achieved during the grinding.

3.Adopting SIEMENS, FANUC^ MITSUBISHI all-digital AC servo control system.

4. grinder  is convenient to operate and adjust.

5.Adopting a high-precision shaft with sleeve for workpiece shaft, the motor of workpiece adopts AC frequency variable motor, frequency variable speed.

6.High rigidity steel is used for the spindles of full-automatic grinder. And a high rigidity, high-precision and high-speed belt shaft is used for the semi-automatic grinder, with the frequency variable speed, grinding at the high-speed of 60m/s.

Bearing Lip Grinding Machine

Lip Grinder,Bearing Lip Grinding Machine,Bearing Grinding Machine,Bearing Lip Grinder

Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.cncsunrise.com