Basic function of ultraviolet radiation illuminometer

With regard to the basic functions of the ultraviolet radiation illuminometer, Shanghai Panbiao introduces you:

1, easy to use:

Simply connect a new sensor and the host will automatically configure it without entering new programs and calibration factors. The detector settings and algorithms are all compressed in the device. The detector can be used right out of the box.

2. Automatic unit conversion:

The results are displayed in various common units. Simply clicking the key changes the unit selection. Common units and conversion algorithms can be programmed on the detector as required.

3, anti-interference ability:

The signal amplification has been done in the detector's metal box. The signal is transmitted to the host through the cable. The cable has the protection function and has high anti-interference ability to EMI and ESD.

4, remote use:

Through a 1 or 5 meter cable, it is convenient to measure when the specified location cannot be reached. The PMA2100 can connect two detectors at the same time.

5, dose synthesis:

Dose synthesis can be done remotely or via the keyboard.

6, traceability:

Each data sample has a series of auxiliary information: date, time, detector type and serial number, current units used, user-set scaling factor, detector calibration date, and a series of flags indicating the status of the instrument.

7, data records:

The host memory holds up to 1024 data. Memory can be started manually or automatically in response to user-set intervals (1 minute - 2 hours). The unified record structure is suitable for all detectors for single data management.

8, computer interface:

The collected data can be transmitted via a serial interface (RS232) to a computer. Use the Hyper Terminal in the window to download, display, and save data.

9, user-defined alarms:

Each detector's independent alarm function can monitor the instantaneous value or integrated measurement. Alarm settings are stored in the detector.