Coiled Tubing Tools Swivel Joint Motor Running/Pulling

COILED TUBING TOOLS

LOCKING SWIVEL JOINT
The Locking Swivel Joint was designed to allow the assembly of long coil tubing strings with minimum lubricator length. Many times it is necessary to have long lengths of lubricator to accommodate the tool string, creating a difficult and dangerous situation.
Now with the Locking Swivel Joint, it allows for sections of the tool string to be made up and lowered into the well bore. The String is spaced out and a pup joint is inserted, allowing the pup joint to seal in the rams of the BOP. The Locking Swivel is placed on top of the section of tools and dropped in the lubricator. Pull the coupling back and tighten the set screws, allowing the clutches to disengage and letting the swivel free spin.
The other section of tool string can now be assembled. Before lowering the swivel in the hole, loosen the set screws so the coupling can slide back down, engaging the clutches. If rotation is required in the tool string, simply take the brass drive pins out from under the coupling and this will prevent any back torque through the string. If run below the motor the clutches must be engaged and brass drive pins installed.
MOTORHEAD ASSEMBLY 
The Motorhead Assembly (M.A) has been developed in recognition to industry demands for compact, heavy duty, integrated BHA components. The M.A combines the Double Flapper Check Valve with the Heavy Duty Hydraulic Disconnect and the Dual Circulation Valve, standard components for virtually all tool string designs. The tubing connector has been deliberately eliminated to give the added flexibility of operator choice for the connector type and coil tubing size.
The M.A. provides the operator with a compact, versatile, upper BHA and offers the following features:

• The M.A's compact design gives an overall length saving of approximately 30% over the use of conventional individual components.
• The high torque capability of the M.A. provides the ideal Motorhead for today's high demand coiled tubing drilling applications.
• The choice of tubing connector is not dictated by the M.A., therefore giving the operator the flexibility to choose the most appropriate connector to suit the application.
• With a considerable reduction in the number of component parts, seals and thread connections, the M.A. is uncomplicated to assemble/disassemble and inexpensive to redress.

MOTOR
A positive displacement drilling motor that uses hydraulic horsepower of the drilling fluid to drive the drill bit. Mud motors are used extensively in directional drilling and coiled tubing operations and can be assemble with a variety of power section to meet the customers well conditions. From hot holes to harmful power fluids such as drilling mud or nitrogen. When ordering specify these parameters to provide the best power section do the job quickly and get the most life out of your motors.
"GS" TYPE RUNNING/PULLING TOOL
The *GS* Type Running/Pulling Tool is designed to run and retrieve downhole tools with conventional internal fish necks. The latching mechanism is a robust dog/core design which releases positively from the internal fish neck when a hydraulic differential is applied to the tool.
The tool does not require shear pins or drop balls since the differential required to activate the tool is provided by circulating through a choke insert in the core.
'GS' Type Running/Pulling Tools are available for all standard internal fish neck sizes.
Features/Benefits:

• Full hydraulic operation
• Multiple latch & release capability
• Proven dog/core design
• Available to catch internal fish necks from 2" to 7"
• Safety shear function