Die Casting Molds for Automotive Industry and Others

1. Factory Area: more than 4000 sqm

2. Employee: more than 110

3. Business field:
1) High pressure die casting die
2) Trimming die
3) Rapid prototype die casting die
4) DME quick-change unit die
5) Tooling components

4. Industry Range
Automotive and Trucking, Recreational Vehicles, Aviation, Telecommunications equipment, Medical Devices, Electrical Instrumentation, daily hardware, motorcycle, etc.

5. Equipment: More than 250
We have two self-owned die casting machines (LK500T and LK800T). We use them for die trial ONLY. There is also oil heater to better control die trial. 

6. Lead time
32 days for die casting dies<500T, 
38 days for die casting dies<800T, 
42 days for die casting dies<1600T, 
48 days for die casting dies<2500T.

7. Capacity
1) Largest dimension of mold we can build:
A. Mold Insert: 900mm*1600mm 
B. Mold Base: 3000mm*3000mm 
2) Die casting machines available for die trial range upto 3200T

8. Quality
1) Certificate: ISO 9001: 2008. ISO 14000 and TS16949 are in agenda.
2) Standard: DME, HASCO
3) Qualified Rate of T1: Over 95% of our molds can be directly put into mass production after T1 with excellent performance.

9. Professional Service: 
1) Responding e-mails within 24 hours
2) Quotation offered within 2 working days after Enquiry and order details received
3) DFM report and mold flow analysis within 3 working days
4) Process report updated every week when start construction.
5) Mold operation instructions, Testing report and recommended parameters, Certificate of steel purchase and heat-treatment QC report, Mold maintenance recommendation, Complete mold drawings, Spare wearing parts, Mold production record provided.

10. Competitive and transparent price
Our Margin Rate is fixed to be 12-20% of the cost price. Quotation List will be offered along with Breakout List of Cost, including labor, steel and others.

Further information, please feel free to contact me!
 


 

Hydrofoil

A hydrofoil is a lifting surface, or foil, that operates in water. It can be applied on the kireboard, surfboard and SUP.

They are similar in appearance and purpose to aerofoils used by aeroplanes. This surf hybrid (aluminium-carbon) foil is made to lift off as early as possible on a wave, an outside reef or soft wave. Its maneuverability and controlled accelerations provide good steering to remain in the right section of the wave when surfing.

Aluminium Hydrofoil,Kiteboard Foil,Surfing Foil,Kite Hydrofoil,Carbon Foil Board,Carbon Foil Kiteboard

Huizhou City Melors Plastic Products Co., Limited , https://www.grandfoam.com