Commercial Fruit & Vegetable Dryer/ Food Dehydrator Machine/ Fruit Drying Machine

Posted on

  • Model NO.: CT-C-I
  • Voltage: 380V
  • Customized: Customized
  • Material: Stainless Steel 304
  • Temperature Control Accuracy: 2 Degree
  • Plate Size: 640*460*45 mm
  • Thickness of Insulating Layer: 8 Cm
  • Net Weight: 600 Kg
  • Transport Package: Wooden Box
  • Origin: Shandong, Chna
  • Type: Dryer
  • Power: 16 Kw
  • Capacity: 100-120 Kg/Batch
  • Blowing Rate: 3450 M3/H
  • Temperature Plate: 48 Pieces
  • Trolly: 2 Pieces
  • Machine Size: 2500*1200*2000 mm
  • Trademark: XD
  • Specification: CE ISO
  • HS Code: 84385

Commercial Fruit & Vegetable Dryer/ Food Dehydrator Machine/ Fruit Drying Machine

Material requirements: 

Inside walls made of stainless steel 0.8mm, 1.2mm wall using stainless steel sheet production, the middle frame with 5 # angle iron support production. 
Bake car uses 38x38, 38x25 stainless steel tube production, rungs using δ1.5mm stainless steel sheet production. 
Baking tray using the punching mechanism, baking tray size: 640*460*45mm silicate insulation materials are cotton insulation, insulation thickness of 80mm. 
Oven door seal made of food grade silicone rubber ring (custom-made according to the requirements of the door)

Production requirements: 
Assembled box for the whole top of the cabinet patchwork of <2mm 
Tank shell temperature <40 ° C (in contact work more than three hours) 
Noise of <72dB (decibels) 
Cabinet duct inner and outer surfaces smooth and no glitches, no obvious bump phenomenon, no dead ends, easy to clean. Flatness of the outer surface of the housing is not more than 5/1000.
Model Capacity (kg/batch) Power (kW) Steam Consumption
(kg/h)		 Heating Radiating Area (m2) Circulating Air (m³/h) Temperature Error (ºC) Baking Pan (piece) Fan Quantity (piece) Dimension L*W*H (m) Drying Car (piece)
CT-C-O 50 0.45 10 10 3400 ±2 24 1 1400*1200*2000 1
CT-C-I 100 0.9 18 20 3400 ±2 48 1 2300*1200*2000 2
CT-C-II 200 0.9 36 40 6800 ±2 96 2 2300*2200*2000 4
CT-C-III 300 1.35 54 80 10200 ±2 144 3 3200*2200*2000 6
CT-C-IV 400 1.8 72 100 113600 ±2 196 4 4300*2200*2000 8
 
Note: About the material, we have carbon steel, aluminium alloy, stainless steel to choose. 
Commercial Fruit & Vegetable Dryer/ Food Dehydrator Machine/ Fruit Drying Machine
Commercial Fruit & Vegetable Dryer/ Food Dehydrator Machine/ Fruit Drying Machine
Commercial Fruit & Vegetable Dryer/ Food Dehydrator Machine/ Fruit Drying Machine
Commercial Fruit & Vegetable Dryer/ Food Dehydrator Machine/ Fruit Drying Machine
Commercial Fruit & Vegetable Dryer/ Food Dehydrator Machine/ Fruit Drying Machine
Commercial Fruit & Vegetable Dryer/ Food Dehydrator Machine/ Fruit Drying Machine

Contact: Ms Helen
TEL: 0086 18661612780
 
 
 

Hydraulic Support System Seals Kits

Hydraulic Support System Seals Kits

Hydraulic Support System Seals Kits
Hydraulic sealing equipment widely used in mine engineering and support system in tunnels
Mining hydraulic support sealing kit
Design description
The piston combined seal consists of a sealing ring, an elastomer and two retaining rings.
The sealing ring plays a sealing role, and the material is high-performance water-resistant polyurethane;
Elastomer provides elastic preload and wear compensation, and the material is NBR;
The retaining ring plays a protective role against extrusion,
The material is polyformaldehyde (POM).
Operating conditions
Maximum pressure: 70MPa,
Maximum speed: 0.3m/s
Temperature range: - 35 ° C~+110C
Working medium: 5% emulsion (HFA)






Hydraulic Construction Machinerhy,Zuigerafdichtingen,Hydraulic Pump Parts,Hydraulic Support,Hydraulic Support System

Safe Seal Technology Co., Ltd. , https://www.aprseal.com