High Quality Dashboard and Leather Wax Sprayer 450ml

Posted on

  • Model NO.: TE-8019
  • Brand: Tekoro
  • Validity: Three Years
  • Trademark: TEKORO
  • Origin: Guangdong, China
  • Type: Lustre Adding Car Cleaning Chemical
  • Volume: 450ml
  • Capacity: 300 - 500ml
  • Specification: CE, RoHS, SGS, GMP
Tekoro Dashboard and Leather Wax can protect leatheroid, plastics and rubbers from harmful UV-rays, high temperature and ozone; Prevent panels, leather and tyre from fading, cracking, wrinkling and aging; Enhance and maintain the original gloss of the paint; Eliminate static and dirt retention.

Applications: Dashboard, cockpit, leather, car tire, bumper, etc 
Flavors available: Lemon, Strawberry, Vanilla, Apple, Ocean, New Car, Orange, Cologne, etc 

Item No.: TE-8019
Can Size: 65mm x 158mm H 
Package: 450ml x 12PCS/CTN 
Carton Size: 275x205x205 mm 
20ft Container Loading: 2500 cartons 
Sizes of 650ml or 750ml are also available. 

1. Remove any water, dirt, grease and so on. 
2. Shake the can well before use. 
3. Hold the can 15-20 cm away from surface to be sprayed. 
4. After spraying, gently Polish with a clean, soft, dry cloth. 

1. Keep away from heat, flame, spark and other source of ignition. 
2. Store in a cool, dry place (45c); Avoid direct sunlight. 
3. Do not clash, puncture, or incinerate the can. 
4. Keep out of reach of children.

Packing details:
Volume Pack Qty Carton Specs. Carton Dimension (estimated) Container Qty (cartons)
L(cm) W(cm) H(cm) 20FT' 40HQ
250ml 24pcs/ctn Kraft paper 33 22 17 2500 5600
400ml 12pcs/ctn Kraft paper 27.5 20.5 20.5 2500 5600
650ml 12pcs/ctn Kraft paper 27.5 20.5 29 1816 3294



Deep Stamping Products

Deep Stamping Products, it can also be called Deep Metal Stamping Parts,Deep Processing Metal Stamping Parts,Deep Processing Stamping Parts.

The manufacturing process of stamping parts is stamping processing. Stamping processing is a kind of power by means of conventional or special stamping equipment, so that the sheet is directly subjected to deformation force and deformed in the mold, so as to obtain product parts of certain shape, size and performance. production technology. Sheet metal, mold and equipment are the three elements of stamping processing.
Stamping is a metal cold deformation processing method. Therefore, it is called cold stamping or sheet metal stamping, or stamping for short. It is one of the main methods of metal plastic processing (or pressure processing), and it also belongs to material forming engineering technology.
Dongjie can produce stamping parts according to your drawings. Dongjie has more than 1500+ sets of molds, and has a professional technical and design team. We can meet your requirements as much as possible. You are welcome to come to consult with your drawings .

Metal Stamping Parts 18

Metal Filter End Caps 1


Deep Stamping Products,Deep Metal Stamping Parts,Deep Processing Metal Stamping Parts,Deep Processing Stamping Parts

Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewire.com