Continuous pumping rods have a high operating intensity and continue to work every day. Sucker rods are subject to corrosion, wear, and other tests. Although the current domestic special-purpose vehicles mostly import accessories from abroad, and their own continuous research and development, the technical level of the continuous rod-rod operating vehicle industry has improved a lot. However, such special-purpose vehicles with high-intensity work will inevitably suffer from minor defects and glitches. In particular, failures caused by improper operation are still relatively numerous. If the work vehicle really has minor problems or minor problems during the work process, or if there are some adverse reactions to the operation, it is best to handle it in a timely manner.
First, perform simple troubleshooting. If the continuous sucker rod working vehicle fails during the work process, the operator can certainly feel it for the first time and should immediately stop its use and carry out a simple troubleshooting. See if the sucker rod has been damaged, slipped, or exposed. Small problems we can solve on our own, but if the investigation does not find the key to the problem, we must find technical personnel for secondary investigation, do not blindly continue to operate the vehicle.
Second, contact the after-sales service personnel directly. Personnel Before we purchase the continuous rod truck, we must be particularly clear in the end what type of after-sales service the other party provides us, whether it can be on-site maintenance, etc. In general, the chassis and the top of the warranty is separate, and the top of the repair Also divided into factory maintenance or factory maintenance, so before the purchase must sign an agreement to ensure their legitimate rights and interests. Of course, there are some failures that are not within the scope of free maintenance. We must also understand in advance. Once the work vehicle cannot be used, or if the fault is not detected, contact the after-sales service personnel for the first time and do not perform the operation again to avoid more serious faults. In particular, do not know the cause of the fault, do not arbitrarily carry out the demolition of the vehicle, it is best to directly find after-sales service. The purchase of a regular brand of special-purpose vehicles has strong vehicle stability and improved after-sales service. It can also ensure that future work will not be affected.
third. Usually pay attention to maintenance. The faulty part of the continuous sucker rod truck is generally two places that are usually common. One is that the ends of the sucker rod and the joints of the steel connectors fall off, and the second is that the working time is too long and the temperature exceeds the operating standard. Therefore, in order to not affect the daily work, we must pay special attention to simple maintenance and troubleshooting. It is advisable to have a dedicated person to perform a complete inspection of the truck before and after each use to see if there is a fault and determine safety before use. When used, they must also work strictly according to the specified operating standards.
Vessel Production Cutting Machine
The CNC cutting machine has the characteristics of fast cutting speed and small slit in the cutting process, which may lead to limited actual cutting speed, excessive kerf and uneven cutting surface, and eliminate the mechanical failure of the plasma CNC cutting machine. Failure to properly set the plasma CNC cutter related parameters during operation will also affect the actual cutting effect.
The hub processing parts of large ships are concentrated in the base of high-power diesel engine, frame, cylinder block, cylinder head, piston rod, crosshead, connecting rod, crankshaft, and gearbox drive shaft, rudder shaft and propeller, etc. The material is special alloy steel, which is generally processed in small batches and requires a processing yield of 100%. The hinged parts have the characteristics of large weight, complicated shape, high precision and large processing difficulty. Large-scale ship pivot processing requires high-power, high-reliability and multi-axis heavy-duty, ultra-heavy CNC cutting machines.
Industrial Laser Cutting Machine,Vessel Production Gantry Cutting Machine,Vessel Production Flame Cutting Machine,Vessel Production Plasma Cutting Machine
Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoermachine.com