Discuss technical parameters of intelligent anti-siphon performance test device

The intelligent toilet anti-siphon performance test device is mainly used for inspecting the anti-siphon performance of flushing valves of intelligent toilets, electronic toilets, smart toilets and non-contact flushing valves, and the test bench is mainly composed of a vacuum generating device and an air circuit. Control, electrical control + test software, test piece inspection, storage tank, airway waterproofing and other components. The equipment meets the special requirements of GB 4706.53-2008, IEC 60335-2-84 safety appliances for household and similar electrical appliances, GB/T 34549-2017 sanitary ware intelligent toilet, CBMF 15-2016 intelligent toilet, GB/T 23131 -2008 Electronic Toilet,JD 0001-2017 Smart Toilet Seat,JG/T 285-2010 Toilet Body Cleaner(Negative Pressure Performance Test),CJ/T 194-2014 Non-contact Water Feeder,ASSE 1020- 2004 Pressure Vacuum Break Valve Standards, ASSE 1013-2011, ASSE1002-2015 toilet anti-siphon water valve performance requirements and many other domestic and international intelligent toilet standards. The test device has high test accuracy and automation, and can provide a variety of sample experimental conditions, and is suitable for use by manufacturers, research institutes, and quality inspection units.

#FormatImgID_0#

Anti-siphon performance test device - on-site physical map

Intelligent anti-siphon performance testing machine - meet the test standard requirements:

1. CBMF 15-2016 "Intelligent Toilet" standard stipulates that the "anti-siphon performance" test method requirements are as follows:

2, GB 6952-2015 "Sanitary Ceramics" standard stipulates "flushing device anti-siphon test" - as follows:

3, GB/T 26750-2011 "Sanitary ware toilet pressure flushing device" standard stipulates "anti-siphon performance test" method - as follows:

4. GB 26730-2011 "Sanitary ware toilet with gravity-type flushing device and sanitary rack" standard stipulates "inlet valve anti-siphon function test" method - as follows:

5, JC/T931-2003 "mechanical toilet flush valve" standard stipulates "anti-siphon performance" method - as follows:

6, JD 0001-2017 "smart toilet seat" standard "anti-siphon performance test" method - as follows:

7. JG/T 285-2010 The standard for "negative pressure performance test" is defined in the standard "sitting toilet cleaner" - as follows:

Intelligent anti-siphon performance test device - equipment characteristics:

1. The device is beautiful in appearance, uses all-round aesthetic design, and the components are made of stainless steel or aluminum alloy to ensure that the equipment is free of rust and long-term trouble-free operation, which greatly improves the service life of the test bench.

2, intelligent design, high-precision electrical signal sensor, compared with mechanical meters, the system accuracy has been greatly improved;

3, the use of frequency control technology, greatly expanding the scope of the multi-stage centrifugal pump suitable conditions, so that the device can use a set of water booster device can achieve a variety of conditions automatically adjusted, low noise; strength test column Plug pump to provide pressure, frequency control, the system is stable and reliable, high controllability;

4. Waterproof protection measures are adopted for the gas pipeline so that the gas pipeline will not enter water under any working conditions, which can fully ensure the safety of the vacuum equipment;

5, the device has good scalability, according to the requirements of the original system on the extension of functions, workstations; voltage regulator system so that the test parameters control precision up to 1.0;

6, the design of multi-functional clamping, can make a variety of mechanical flushing valve, installed in the test fixture, so that the device is widely applicable, easy to operate.

Intelligent anti-siphon performance testing machine - the main performance indicators:

1, water pressure source:

1) Large pressure 0 ~ 1.8 Mpa, precision: 1.0;

2) small pressure 0 ~ 0.05Mpa, precision: 1.0;

3) negative pressure 0 ~ -0.1 Mpa Accuracy: 1.0;

2, test station: 1 station.

3, test time range: 0 ~ 99999999S (can be preset);

4, test times: 1 ~ 99999999 times (can be preset);

5, pressure regulator: manual or automatic;

6, equipment size: (W*D*H)1650*1400*1880mm;

7, equipment power: AC220V, 50Hz; 2.2KW.

Intelligent anti-siphon performance testing machine - Successful application case:

National Ceramic and Plumbing Bathroom Quality Supervision and Inspection Center;

National Building Ceramics Quality Supervision and Inspection Center.

Editor Source: Delta Delta Instruments - Engineering Technology Division

(Please indicate the source)