Domestic Water Cycle Pump, Mini Booster Pump, Hot Water Circulator Pump

Specifications
Circulator pump, wet rotor type, 304s.S.
No noise <45db(a), no leakage, environment friendly, easy installation
 

3-speed hot water circulation pump 
1.Low enegy consumption 
2.No leakage 
3.Lowest noise 
4.Manufacturer, factory

 

This circulation pump especially designed for heating system and used to supply water 

and add pressure for mansions of city,villa of subarb,house,to match with industrial equipment,

to supply water in cycle for cooling air-condition,boiler and solar energy,suppy hot andwater and keep warm cycle.

Construction Material

•  Motor wire:copper
•  Motor shell: aluminium
•  Rotor can: stainless steel 304
•  Impeller: PP
•  Pump body: cast iron
•  Shaft: ceramic/S,S
•  Bear: ceramic/graphite

Technical Data

• Liquid temperature range: -10 - 110°C
• Pipe size:G11/2", DN25mm
• Port to port length: 130mm
•  Max. operating pressure: 10bar
• Pressure stage, pipe connection: PN10

Electrical Data

• Max head:6m
• Max flow:65l/min
•  Max input power.: 100W/67/46
•  Mains frequency: 50/60Hz
•  Rated voltage: 220V
•  Max. current: 0.4A
•  Capacitor size: 3uf

Specifications
Circulator pump, wet rotor type, 304s.S.
No noise <45db(a), no leakage, environment friendly, easy installation
 

3-speed hot water circulation pump 
1.Low enegy consumption 
2.No leakage 
3.Lowest noise 
4.Manufacturer, factory

 

This circulation pump especially designed for heating system and used to supply water 

and add pressure for mansions of city,villa of subarb,house,to match with industrial equipment,

to supply water in cycle for cooling air-condition,boiler and solar energy,suppy hot andwater and keep warm cycle.

Construction Material

•  Motor wire:copper
•  Motor shell: aluminium
•  Rotor can: stainless steel 304
•  Impeller: PP
•  Pump body: cast iron
•  Shaft: ceramic/S,S
•  Bear: ceramic/graphite

Technical Data

• Liquid temperature range: -10 - 110°C
• Pipe size:G11/2", DN25mm
• Port to port length: 130mm
•  Max. operating pressure: 10bar
• Pressure stage, pipe connection: PN10

Electrical Data

• Max head:6m
• Max flow:65l/min
•  Max input power.: 100W/67/46
•  Mains frequency: 50/60Hz
•  Rated voltage: 220V
•  Max. current: 0.4A
•  Capacitor size: 3uf

Solder Ring Copper Fittings

To obtain perfect joins, inside of the solder ring copper fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is then inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. Sizes we have available are from 8mm to 54mm For EN1254-1 and 1/2" to 2" for ASME B16.22 ,solder ring Copper Fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings

solder ring copper fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings

Taizhou Runde Company , https://www.nerausmotor.com