The cold winter has arrived and vehicle maintenance is undoubtedly the most concerned topic for car owners. After the vehicle has passed the warranty period, some failures will inevitably occur. Automobiles need “three-point repairs and seven-point supportâ€. Through active inspection and maintenance, it is necessary to discover and eliminate some initial, hidden and hidden failures.
Pay more attention to parking and starting the vehicle
When parking at night, try to avoid parking the vehicle at the tuyere because the vehicles are all made of metal, especially inside the cylinder of the engine. After a night's blow and low temperature, the metal's endothermic character and conductivity will cause frost inside the engine. The internal temperature will drop very low, which will not only bring great difficulties to the start of the engine, but also cause great damage to the engine itself. Therefore, try not to drive or hit the throttle immediately after starting the vehicle in winter, because the oil is transported to various parts through the oil pump. If it is not well lubricated, it will cause serious damage to the various parts of the vehicle.
Eliminate fog, often check the lights, pay attention to the line of sight
The most common problem in winter driving is the mist in the glass of the vehicle, which makes the owner's vision unclear, and thus brings hidden danger to traffic safety. At this point, you can place the temperature knob in the warm air position to achieve both defogging and warming. Light inspections mainly include fog lights, headlights, and high-level brake lights. Once a blackened light bulb is discovered, it must be replaced as soon as possible. Ordinary halogen headlamps generally use light for two years, and the light temperature should be between 5000 and 6000K if the headlights are to be modified. Because the higher the color temperature, the lower the penetration of light in dense fog weather, the greater the potential safety hazard.
Winter should pay attention to tire maintenance
Tyre rubber will become hard and relatively brittle in winter, and the coefficient of friction will decrease, so the tire pressure should not be too high, but it must not be too low. The outside temperature is low, the tire pressure is too low, and the soft tire will seriously accelerate tire aging. Always remove the inclusions in the tread pattern during the winter, try to avoid using tires that have been repaired more than once, and replace the tires that have worn out more and different patterns of different brands. The wear inside and outside the tire varies widely. To ensure safe wear reduction, the tire should be changed regularly.
Pipe Processing Equipment In Chittak
The pipe processing equipment are widely used in manufacture industries such as automotive, motorcycle, bicycle, child-bike, ship building, steel furniture, recreational products, tubes for air conditioner, light, sanitary ware, fitness equipment, stainless steel engineering.Chittak has owned a powerful sales team, to provide efficient, professional and advisory solutions for all cooperation partners and customers.
The best pipe bending machine , pipe forming machine, 45 degree pipe cutting machine
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutting.com