Introduction: In the concrete mixing station, the commonly used raw materials are generally sand aggregate and cement powder. In the concrete mixing plant project site, the orderly stacking of raw materials is an important way to increase the production efficiency of the entire mixing plant. How can we orderly stack the raw materials of the concrete mixing plant?
The raw materials for the concrete mixing plant should be piled or stored separately according to varieties and specifications, and marked with striking signs to avoid mixing. Specific performance in the following points:
1. Sand and stone must be piled up according to different varieties and specifications. There are measures or facilities to prevent mixing. The yard should adopt hard floor and reliable drainage measures. There should be an eye-catching indicating plate indicating the type and specifications.
2. The cement warehouse must have an eye-catching indicating nameplate, and different types of cement are forbidden to mix warehouses. Cement that has been stored for more than three months should be retested before use and used according to the test results. Keep the cement sealed, dry, and protected from moisture during storage.
3. The admixture must be stored separately according to different varieties. There are marked manufacturers, varieties, etc. of the admixtures. For admixtures with a shelf life of more than three months, they should be re-inspected before use and used according to the test results. When the liquid admixture is replaced with a manufacturer or variety, the storage container should be cleaned.
The orderly placement of raw materials in the concrete mixing plant enables us to understand all kinds of raw materials in a timely manner, and we are convinced that we can improve the efficiency of the entire mixing plant!
Source: Zhengzhou Lianhua Machinery Manufacturing Co., Ltd.
Aluminum adhesive tape is widely used in different industry.Aluminum foil has a clean, sanitary and shiny appearance. It can be integrated with many other packaging materials. Moreover, the printing effect of aluminum foil surface is better than other materials. In addition, aluminum foil has the following characteristics: (1) the surface of aluminum foil is extremely clean and hygienic, and no bacteria or microorganism can grow on the surface. (2) Aluminum foil is a non-toxic packaging material, it can directly contact with food without any harm to human health. (3) Aluminum foil is a kind of tasteless and odorless packaging material, which will not make the packaged food have any peculiar smell. (4) If the aluminum foil itself is not volatile, it and the packaged food will never dry or shrink. (5) No matter in high temperature or low temperature, aluminum foil will not have grease penetration phenomenon. (6) Aluminum foil is an opaque packaging material, so it is a good packaging material for products exposed to sunlight, such as margarine. (7) Aluminum foil has good plasticity, so it can be used to package products of various shapes. It can also be made into containers of various shapes. (8) Aluminum foil has high hardness and tensile strength, but its tear strength is small, so it is easy to tear apart
Aluminum Foil,6061 Aluminum Coil,Aluminium Foil Roll,Aluminium Foil Price
Trumony Aluminum Limited , https://www.szaluminumsheets.com