Product Description
IEC60695-11-5 NEEDLE FLAME TESTER
Needle-flame Tester could be applicable to ignition hazard test, combustibility test of electronic industry, home electronic appliance and materials. This tester specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material's ignition risk and fire retardance by a simulation technique the fire.
This product is designed and manufactured according to IEC60695-11-5:2004(GB/T5169.5-2008) Fire hazard testing for electric and electronic products-part 2: Test methods- needle-flame test methods.
Needle-flame Tester's crust and important parts are made by Stainless Steel, Sculpt daintily, endure smoke corrupt, high automatism, high reliability of key parts of apparatus, numeric shows. Fixture could be adjusted. Test procedure could be controlled automatically which is convenience and reliable.
Detailed Images
| needle burner | the hole Φ 0.5mm ± 0.1mm, outside diameter ≤ Φ 0.9mm, length ≥ 35mm, |
| Material | stainless steel |
| burner angle | tilt 45 ° (test) or vertical (adjust the flame height) |
| Application time | 0-999 .9 s ± 0.1s adjustable (normally choose to 30s) |
| Burning duration | 0-999 .9 s ± 0.1s, auto record, manual suspension |
| flame height | 12mm ± 1mm (with a height measurement apparatus) |
| Burn gas | 95% of the butane gas (Pressure:Less than 0.2MP) |
| temperature measurement range | 0 ~ 1000 ºC |
| flame temperature requirements | from 100 ºC ± 2 ºC 700 ºC ± 3 ºC rise to the time in 23.5 seconds ± 1 seconds |
| Thermocouple | Φ0.5mm (K type) |
| experimental background | black background |
| test procedure | automatic control |
| reference standard | IEC60695 -11-5-2004, GB/T5169.5-2008 |
| inside dimension | 0.5 cubic meters, stainless steel chassis |
| equipment dimensions | 1000mm wide × 650mm deep × 1300mm high |
| power supply | AC220V ± 5%, 50Hz, 0.3KVA |
         Â
1. How to buy BONAD's products?
Firstly, please send us an inquiry letter or contact us on Trade Manager. Secondly, we will send you our quotation or PI and design drawing based on your requirements. Â Thirdly, you make the deposit payment, we begin the production process. Â Then, you make the balance payment, we arrange the shipping process. Â Finally, we send you BL and you can pick up your goods at the port.Â
2. What's your payment terms?Â
BONAD Â accept T/T, PAYPAL,WESTER UNION,
3. Are we factory?Â
Yes,we are Factory + trade(intergration),more than 10 years experience on test instruments firld.Â
4. Can we visit your company to inspect the goods?Â
Of course. You will be very wecolmed to visit our factory, even not for inspecting goods.Â
For any questions, please feel free to contact me.
Â
Product Description
IEC60695-11-5 NEEDLE FLAME TESTER
Needle-flame Tester could be applicable to ignition hazard test, combustibility test of electronic industry, home electronic appliance and materials. This tester specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material's ignition risk and fire retardance by a simulation technique the fire.
This product is designed and manufactured according to IEC60695-11-5:2004(GB/T5169.5-2008) Fire hazard testing for electric and electronic products-part 2: Test methods- needle-flame test methods.
Needle-flame Tester's crust and important parts are made by Stainless Steel, Sculpt daintily, endure smoke corrupt, high automatism, high reliability of key parts of apparatus, numeric shows. Fixture could be adjusted. Test procedure could be controlled automatically which is convenience and reliable.
Detailed Images
| needle burner | the hole Φ 0.5mm ± 0.1mm, outside diameter ≤ Φ 0.9mm, length ≥ 35mm, |
| Material | stainless steel |
| burner angle | tilt 45 ° (test) or vertical (adjust the flame height) |
| Application time | 0-999 .9 s ± 0.1s adjustable (normally choose to 30s) |
| Burning duration | 0-999 .9 s ± 0.1s, auto record, manual suspension |
| flame height | 12mm ± 1mm (with a height measurement apparatus) |
| Burn gas | 95% of the butane gas (Pressure:Less than 0.2MP) |
| temperature measurement range | 0 ~ 1000 ºC |
| flame temperature requirements | from 100 ºC ± 2 ºC 700 ºC ± 3 ºC rise to the time in 23.5 seconds ± 1 seconds |
| Thermocouple | Φ0.5mm (K type) |
| experimental background | black background |
| test procedure | automatic control |
| reference standard | IEC60695 -11-5-2004, GB/T5169.5-2008 |
| inside dimension | 0.5 cubic meters, stainless steel chassis |
| equipment dimensions | 1000mm wide × 650mm deep × 1300mm high |
| power supply | AC220V ± 5%, 50Hz, 0.3KVA |
         Â
1. How to buy BONAD's products?
Firstly, please send us an inquiry letter or contact us on Trade Manager. Secondly, we will send you our quotation or PI and design drawing based on your requirements. Â Thirdly, you make the deposit payment, we begin the production process. Â Then, you make the balance payment, we arrange the shipping process. Â Finally, we send you BL and you can pick up your goods at the port.Â
2. What's your payment terms?Â
BONAD Â accept T/T, PAYPAL,WESTER UNION,
3. Are we factory?Â
Yes,we are Factory + trade(intergration),more than 10 years experience on test instruments firld.Â
4. Can we visit your company to inspect the goods?Â
Of course. You will be very wecolmed to visit our factory, even not for inspecting goods.Â
For any questions, please feel free to contact me.
Â
These J55 , L80, N80 & P110 tubing couplings are manufactured accordance with
API 5CT specification:
Type : API 5CT Tubing Couplings
Thread Type : NUE/EUE
Grade : J55, L80, N80 & P110
Standard : API 5CT
Surface Treatment : phosphating treatment
Color Code: J55 Green
L80 Red with brown strips
N80 Red with green strips
P110 White
Casing Coupling,Female Shaft Coupling,Eue Tubing Coupling,Oilfield Equipment Mining Oilfield Coupling
Hengshui Weijia Petroleum Equipment Manufacturing Co.,LTD , https://www.hswjpupjoint.com