ISO9772 Foam Plastics Horizontal Burning Test Bunsen Burner Chamber Laboratory Flammability TesterÂ
Introduction:Â
Foam plastic horizontal burning testing equipment is in accordance with the national standard GB / T8332-2008 : Determining the combustion properties of the foam plastic by horizontal combustion test method.
To determine the small foam sample whose density should be less than 250kg / m³ combustion performance levels in a small flame density. The PLC and touch screen can realize the intelligent measuring and it can also provide a convenience and simple procedure for the experimenter.
This testing equipment applies to assess of the combustion performance, including burning rate, fire out time, firing range and quality loss.
Â
Application:Â
- Foam products, plastics, polymer materials, etc.
Standard:Â
- EN ISO 9772--Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- GB/T8332-2008
 Product Image:Â
Â
Features:Â
1. This testing equipment consists the testing section and control components, it is easy for field installation and commissioning.
2. A large observation window is easy to observe the sample combustion state.
3. Advanced industrial appearance and control designing, easy to touch the specimen and burner.
4. Controlling the movement of the burner after closing the door.
5. Bunsen burner is in according with ISO 10093: 1998.
         Shaft length: 100 ± 10mm,
         Inner diameter: 9.5 ± 0.3mm.
        The height of of flame :38 ± 2mm
6. The programmable controller PLC + touch screen for control / testing / computing / data display.
         (1) High-voltage automatic ignition
         (2) The digital pressure gauge and the touch screen displays the gas pressure and flow.
         (3) Burning time is automatically stored and reflected in the test report.
         (4) The test time and flame time can be set from  the touch screen.
         (5) The liquid crystal screen  accurately displays the temperature
7. Equipped with smoke hole and exhaust  fan.
8. Import pressure gauge and pressure regulator.
9. Imported gas mass flow meter and  needle valve can accurately control the gas flow.
10. The automatic time record can reserve the testing time.
11. The volume of tank is more than 0.5m³.
Â
Specification:Â
| Ambient temperature | 10 ~ 35 ºC |
| Relative humidity | ≤75% |
| Power supply | 110V AC 60Hz / 230V AC 50Hz |
| Air purity | ≥95% natural gas, propane |
| Weight | about 60kg |
Packaging & Shipping:Â
 Packed in standard export wooden case
Â
FAQÂQ: How long is the delivery time?
A: 5-50 days after we received your payment or order confirmed.
Q: What is the payment terms?
A: T/T, L/C, Western Union, etc.
Q: What is the delivery terms?
A: FOB, EXW, CNF, CIF, etc.
Q: How to make sure the equipment is accordanc with related standards?
A: All the devices are designed and made strictly according to International satandards, you can also consult our client about their use experience.
Q: What is the warranty for the ISO9772 Foam Plastics Horizontal Burning Test Bunsen Burner Chamber Laboratory Flammability Tester?
A: 12 Months. We can also provide you a lifelong technical support.
Q: What after-sales service can be provided by Gold?
A: The after-sales service of Gold is divided into two parts: technical support and maintenance.
Q: What about the technical support and maintenence?
A: Sometimes users who are unfamiliar or first time use may meet some problems when they operate the equipment, you can send us emails or calls with detailed information. We will provide users solution or operation video to you. For so many years' experience, our instruments works quite well. If there is any part broken down during warranty period, we would like to provide spare parts for free.Â
*ISO9772 Foam Plastics Horizontal Burning Test Bunsen Burner Chamber Laboratory Flammability Tester
With excellent service and competitive price
For more information, pls contact me at any time
Â
 ISO9772 Foam Plastics Horizontal Burning Test Bunsen Burner Chamber Laboratory Flammability TesterÂ
Introduction:Â
Foam plastic horizontal burning testing equipment is in accordance with the national standard GB / T8332-2008 : Determining the combustion properties of the foam plastic by horizontal combustion test method.
To determine the small foam sample whose density should be less than 250kg / m³ combustion performance levels in a small flame density. The PLC and touch screen can realize the intelligent measuring and it can also provide a convenience and simple procedure for the experimenter.
This testing equipment applies to assess of the combustion performance, including burning rate, fire out time, firing range and quality loss.
Â
Application:Â
- Foam products, plastics, polymer materials, etc.
Standard:Â
- EN ISO 9772--Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame
- GB/T8332-2008
 Product Image:Â
Â
Features:Â
1. This testing equipment consists the testing section and control components, it is easy for field installation and commissioning.
2. A large observation window is easy to observe the sample combustion state.
3. Advanced industrial appearance and control designing, easy to touch the specimen and burner.
4. Controlling the movement of the burner after closing the door.
5. Bunsen burner is in according with ISO 10093: 1998.
         Shaft length: 100 ± 10mm,
         Inner diameter: 9.5 ± 0.3mm.
        The height of of flame :38 ± 2mm
6. The programmable controller PLC + touch screen for control / testing / computing / data display.
         (1) High-voltage automatic ignition
         (2) The digital pressure gauge and the touch screen displays the gas pressure and flow.
         (3) Burning time is automatically stored and reflected in the test report.
         (4) The test time and flame time can be set from  the touch screen.
         (5) The liquid crystal screen  accurately displays the temperature
7. Equipped with smoke hole and exhaust  fan.
8. Import pressure gauge and pressure regulator.
9. Imported gas mass flow meter and  needle valve can accurately control the gas flow.
10. The automatic time record can reserve the testing time.
11. The volume of tank is more than 0.5m³.
Â
Specification:Â
| Ambient temperature | 10 ~ 35 ºC |
| Relative humidity | ≤75% |
| Power supply | 110V AC 60Hz / 230V AC 50Hz |
| Air purity | ≥95% natural gas, propane |
| Weight | about 60kg |
Packaging & Shipping:Â
 Packed in standard export wooden case
Â
FAQÂQ: How long is the delivery time?
A: 5-50 days after we received your payment or order confirmed.
Q: What is the payment terms?
A: T/T, L/C, Western Union, etc.
Q: What is the delivery terms?
A: FOB, EXW, CNF, CIF, etc.
Q: How to make sure the equipment is accordanc with related standards?
A: All the devices are designed and made strictly according to International satandards, you can also consult our client about their use experience.
Q: What is the warranty for the ISO9772 Foam Plastics Horizontal Burning Test Bunsen Burner Chamber Laboratory Flammability Tester?
A: 12 Months. We can also provide you a lifelong technical support.
Q: What after-sales service can be provided by Gold?
A: The after-sales service of Gold is divided into two parts: technical support and maintenance.
Q: What about the technical support and maintenence?
A: Sometimes users who are unfamiliar or first time use may meet some problems when they operate the equipment, you can send us emails or calls with detailed information. We will provide users solution or operation video to you. For so many years' experience, our instruments works quite well. If there is any part broken down during warranty period, we would like to provide spare parts for free.Â
*ISO9772 Foam Plastics Horizontal Burning Test Bunsen Burner Chamber Laboratory Flammability Tester
With excellent service and competitive price
For more information, pls contact me at any time
Â
rotational moulding machine,high-speed rotary blow molding machine,pneumatic rotary blow molding machine
Sentis Equipment Co.,Ltd , https://www.spemachine.com