The rear-end crash is a relatively common traffic accident, and it is also the most common mistake for novice drivers. So, how can we prevent rear-end collisions when novice drivers drive on the road? Impatient, the skills will be delivered soon, look patiently
One, follow the car attention to the distance
Some drivers are particularly close to the car, and the front of the car has no affixed renminbi. Why is it so dangerous that it is so close? Especially on high speed. High-speed following the car to set the distance from the car, remember the "three-second rule", such as 120km / h when the speed is basically to maintain a distance of about 100 meters. Urban driving does not apply this principle. If it is too far away, it will be frequently jammed by the side car. At this time, it is necessary to determine the distance of the following car according to the road conditions.
Second, uphill section pay attention to the distance
If you go uphill or on an overpass, etc., if you stop when the speed is slow, you should pay attention to the distance from the front car. In addition, we must pay special attention to the fact that we must not be behind a full-size cart. We may drop something from the car at any time. Even if we drop a small stone while driving, it may be fatal and not fatal. Will damage your car.
Third, high-speed traffic jam ahead of schedule
When there is a traffic jam at high speed, if you are in front of a big car, you need to park in advance. It's best to stop at a distance, and if someone plugs it forward, he can let him add it. To see more accidents in the rear-end cart of a car, it is generally the case that the car is jammed into the bottom of the cart, and the risk factor does not say that you also know.
Fourth, novice drivers do not follow six kinds of cars
1, carts, carts do not block the line of sight does not say, you may also suddenly drop goods on the way, bruises and bumps are not good, it is even more terrible rear-end.
2, buses, cities do not drive with the bus, will also block the front line of sight, easy to red light; as well as public transit lanes like the station, with the car more trouble.
3, taxis, some people waved or passengers get off, taxi master may stop at any time to stop, if the master no more point headlights, after the car is more rampant.
4, foreign cars, drivers are often unfamiliar with the local terrain, driving slow and easy to park or suddenly change lanes, or far from good.
5, the practice car, novice driver technology is not skilled, driving speed is uncertain and easy emergency brake, followed by from time to time to press a horn press, will make him more nervous, a nervous do not know what will happen.
6, modified cars, general household cars do not have good performance of the modified car, if the front of the car suddenly brake, the rear car may be due to the reaction is not timely and rear-end, so it is far from it.
Use and performance of Graphite electrodes
use
Used in steelmaking electric arc furnace, refining furnace, as conductive electrode; Used for industrial silicon furnace, phosphorus furnace and corundum furnace, as conductive electrode.
performance
High resistance to thermal shock and high mechanical strength
grade
High power Graphite Electrode (SHP) high power graphite electrode (UHP) with high power graphite electrode (HP) with high power graphite electrode (R
Precautions for use of graphite electrodes
1. According to the capacity of the electric furnace and the load of transformer, the grade and diameter of the electrode are suitable
2. When loading the electric furnace, the bulk charge shall be placed in the bottom of the furnace so as not to break the electrode. In the process of smelting, the lime should not be conductive. Large masses of objects are concentrated directly below the electrode, otherwise it will affect the electrode and even cause the electrode to break.
3. Attention should be paid to the position of the furnace cover. If the furnace cover is offset, the cover of the furnace will be blown on the lifting electrode, causing the electrode to be damaged.
4. When connecting the electrode, if the defect of joint bolt is found, the connection should be made after replacement
5. After the electrodes are connected, if there is a gap in the connection surface, it is important to find out the reason
6. The electrode should be used vertically.
7. The electrode holder shall be sandwiched between the upper and lower levels of the top electrode, and shall not be sandwiched between the warning line and the middle electrode. Otherwise, the electrode column is easily broken
8. The raw materials and production techniques of different manufacturers may vary. The physical and chemical properties of the electrode are also different, and it is recommended that the joints and electrodes produced by different manufacturers should not be used in a different way.
High Power Graphite Electrode,Die-Cast Graphite Electrodes,Bone Bit Graphite Electrod,Thermal Graphite
Fengcheng Ruixing Carbon Products Co., Ltd , https://www.lnfcrxts.com