(KLG401) Basic Type Spiral Wound Gasket

 

Description:
Spiral wound gasket is formed of V-shaped Metallic strip and soft non-metallic filler. Support rings, inside and Outside the spiral, improve the gasket's handing, fitting and Versatility.
Depend on its excellent compression resilience, it is suitable for sealing spots where the alteration of temperature and pressure are frequent.

Types:




Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.

Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.

Outer Ring Type
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.

Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.

Typical Applications:
Pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc.
Petrochemical, chemical, mechanical manufacturer, power station, metallurgy, shipbuilding, medical and pharmaceutical unclear power station and navigation, etc.

Prime Features:
> Gasket are made in a wide variety of sizes and shapes.
> Combinations of metal strip and filler are selected to suit the specific fluid media and operating conditions.
> Quick to install and remove
> Make gaskets suitable for high pipeline pressure on flat or raised flange faces.
> Temperatures from cryogenic up to 1000 º C

Specifications:
> Products are manufactured in accordance with all relevant gasket standards to suit flange designations: ASME B 16.20, ASME B 16.5, BS1560, ASME B 16.47 A (B), BS EN 1092, DIN, JIS, and NF, etc.
> Color cord as ASME B 16.20 on request.

Spiral Wound Gaskets Package Types:
Between 1/2'' ~ 24'' gaskets are packaged by plastic clips each 10 pcs.
Up to 24'' gaskets packaged by soft cotton tape each.
To ensure that clients receive the highest quality of spiral wound gaskets.
 

Product Display:





Application:




 

Cetificate: 



Contact:



FAQ: 
Ask 1: Why some suppliers give me the price much cheaper than you?
Answer:1.They wanna attract your attention,while you contact with them,they would  raise the price by any reason.
              2.They won't provide the high quality to you cause it had the cheap price.
Ask 2:What the MOQ?
 Answer:Details you can talk with us .
Ask 3:Should i pay for it If some product need samples?
 Answer:I'm afraid you should pay for it,However,We would return it back when we get the first order. 
Ask 4:What's the delivery circle times ?
Answer:About 2 weeks and we would give the accurate time when we know the quantity.
Ask 5:What's the FOB port?
Answer:Our ports are Shanghai and Ningbo usual.
 
 Welcome you to cooperate with us and join us. We are your best choice. Trust in us! You will not regret it!

 
 

 

1.2 Ton Mini Excavator XN12 with Japanese Yanmar engine,different engine models can be meet different market requirements.

Yanmar 3TNV70  -Stage III

Yanmar 3TNV74F :11.2kw  -Euro V

Yanmar 3TNV74F :11.2kw  -EPA III

Rhinoceros brand Mini Excavator can be say Chinese 1.2 ton mini excavator originator,the 1.2 ton mini excavator have been exported more than 5 years,the excavators also keep upgrading for meet customers's new needs.

The 1 Ton Mini Excavator XN10 every years more than 2000 units mini excavators sell in Europe market,1000units sell in Australia market,more than 500 units to US ,Canada market.

1.2Ton Mini Excavator

1.2 Ton Mini Excavator Machine,Mini Excavator 1.2 Ton,1.2 Ton Small Excavator,1.2 Ton Micro Excavator

SHANDONG KEN STONE HEAVY MACHINERY CO.,LTD , https://www.chinaexcavator.com