The machine includes passive uncoiler unit,sheet guiding equipment,roll forming system,post cutting equipment,hydraulic station,PLC system and run out table and the bending machine
Â
A, Technical parameter:
1.       Machine specification: forming thickness(0.5-0.6)xL, yield strength≤G250Mpa
2.       Forming speed: 12-15M/min (EXCLUDING CUTTING STOP TIME)
3.       Forming roller: about 24 groups
4.       Main motor power: 7.5KW
5.       Hydraulic station power:4KW
6.       Roller material: 45# forged steel, surface coated with chrome
7.       Main shaft material: 45# steel
8.       Main axis dia.: 68mm
9.       Hydraulic cutting pressure: 10-12Mpa
10.   Cutting method: hydraulic powered, cutting after roll forming.
11.   Cutting blade material: Cr12 quenching treatment
12.   Electrical controlling system: Whole line adopted PLC control, cut to length tolerance≤2mm
B, Roll forming line comprised equipment
YX76 DOWNPIPE ROLL FORMING MACHINCE comprised of 3T manual uncoiler, main drive, infeed guiding, roll forming machine, tighten device, cutting equipment, hydraulic system, electrical controlling system, output table.
C, Flow Chart
Uncoiling Infeed Guiding Roll forming Tighten Hydraulic cutting Run-out table 
Package and loading machine;
Our Honorable Prize
| Number | Items | Unit\Type | RF-RC |
| 1 | Steel Thickness | mm | 0.5-0.6 |
| 2 | Forming Speed | m/min | 8-12 |
| 3 | Roller stands | stand | 20 or 24 |
| 4 | Roller Material | Â | 45# steel, coated with chrome |
| 5 | Main Motor Power | Kw | 7.5 |
| 6 | Hydraulic cutting Power | Kw | 4 |
| 7 | Hydraulic pressure | Mpa | 10-12 |
| 8 | Power Supply | Â | 380V, 50HZ,3 phase |
| 9 | Tolerance | mm | 1.5 |
| 10 | Material of cutting | Â | Cr12 |
| 11 | Control system | Â | PLC with touch screen |
| 12 | Machine net weight | T | 8 |
Ceramic Ring Magnets,Ceramic Block Magnets,Ceramic Ferrite Magnets,Ceramic Disc Magnets
Dongguan Zhenglong Magnet Co., Ltd , https://www.zlmagnetoelectric.com