Compared with other gates, the main advantage of the swing gate gate is that the swing speed is fast and beautiful. When choosing a swing gate, you need to pay attention to the following aspects:
1. Aesthetics: The trend of the swing gate is single-column double-swing, slender. Aesthetics can only be judged by yourself.
2. Safety: The swing gate generally relies on infrared photoelectric detection to detect the flow of people. When the error is detected, the swing door will hit the pedestrian, causing unnecessary disputes, and the number of photocells should not be too small. The swinging force of the swinging door should not be too large, otherwise it will hurt people. In the closed position, the swing door cannot be manually opened, otherwise the basic requirements of the access control are lost.
3. Reliability: The reliability of the gate is based on the reliability and integration of various components of the gate. The selection of good quality components is the basis, such as card readers, controllers, displays, etc.; the integration method mainly depends on the design and selection of the control unit and the communication method. The presence or absence of lightning protection components is also related to the reliability of the equipment.
4, rotation life: swing gate is driven by the motor to rotate, continuous movement, motor life and the life of the speed reduction mechanism determines the mechanical life of the equipment.
5, material: the gate for people to use, a variety of external forces frequently, mechanical strength is an important consideration; the long-term operation of the gate, is a "portal", should be beautiful, so the choice of 1.5-2.0mm stainless steel is necessary. Stainless steel is available in a variety of models and is available in 304 stainless steel. The door sheet material is preferably made of a flexible material.
6, the glass material above the bar code reader: the bar code reader must be transparent above, the cost of plexiglass is low, easy to process and install, but after multiple brushing, the glass will wear rough, affecting the reading speed and accuracy of the bar code Therefore, wear-resistant quartz glass must be used;
7, the speed of ticket inspection: the large flow of the gate, the speed of ticket inspection is a very important indicator. The ticket inspection speed depends on the control mode of the gate, the communication networking method, the ticket processing software, and the mechanical movement speed. Generally, the gate response speed is within 500ms.
Round Molded Graphite
As the name implies, Round Molded Graphiteis a cylindrical product of graphite electrode, which is made of graphite block materials by crushing, screening, batching, shaping, cooling, roasting, dipping and graphitization of post section petroleum coke and medium temperature coal tar pitch. It has the advantages of high temperature resistance, corrosion resistance, good conductivity and light weight. It is mainly used for large DC resistance furnaces, blast furnace bricks, conductive electrodes, lining anti-corrosion and other purposes.
The high-purity graphite, graphite block and Molded Graphite produced by Pingdingshan Carbon Graphite Factory for many years are excellent, and the specifications of Round Molded Graphite are as follows: φ 450*800, φ 520*400 φ 630*420, φ 660*620 φ 780*600, φ 820*350~500 φ 900*350~400, φ 1050*350~400 φ 980~350*400, φ 1160*350~680 φ 1260*350~680, φ 1330*400 φ 1420*400, φ 1520*400 φ 1630*350, φ 1800*350 φ 2000*350, φ 520~2000*680
Round Rod Graphite,Graphite Round Stock,Round Molded Graphite,Graphite Round Square Shape
Henan Carbon Road New Material Technology Co., Ltd , https://www.kygraphitematerial.com