The China Automotive Industry Medical Waste Transfer Vehicle is part of the China Ministry of Industry and Information Technology Medical Waste Transfer Vehicle Automotive Bulletin All 5 Categories 25 Manufacturers 24 Medical Waste Transfer Vehicle Brand 98 Medical Waste Transfer Vehicle Product Information, Latest Medical Waste Transfer Car announcements, environmental announcements, fuel announcements, exemption announcements, pictures, news and pricing information on the most timely medical waste transfer vehicles.
Medical waste transfer vehicles: medical waste transfer vehicles also known as: medical garbage transport vehicles, medical waste transport vehicles, medical garbage collection vehicles, medical waste transfer vehicles and other names.
Background of medical waste transfer vehicles: In 2003, the outbreak of SARS broke out in China and spread rapidly throughout the country. All medical institutions became the first battlefield against SARS. SARS spreads through droplets and is very infectious. Meanwhile, a large number of The patients have produced a large amount of medical waste. For this kind of medical waste that may carry highly infectious pathogens, transportation and treatment processes must be strictly protected to prevent the spread of germs. At that time, China's medical waste disposal In the state of insufficient long-term attention, the construction of centralized disposal facilities lags behind seriously, the loss of medical wastes is serious, a large amount of medical wastes are mixed into domestic garbage, medical wastes are collected, transferred, and storage is not standardized, there is no classification collection, no special packaging materials and containers, and no special The pollution of transport vehicles during transportation cannot be completely avoided, especially in the period of SARS, the hazards are even more obvious, and the situation of ensuring environmental security and people's health is very serious. It is precisely in this situation that, based on the need to respond to atypical pneumonia, it is imperative to regulate the transportation of medical wastes and to ensure the safety of transportation. At that time, the State Environmental Protection Administration issued an emergency task of formulating the “Technical Requirements for Medical Waste Transfer Vehiclesâ€. In May 2003, the State Environmental Protection Administration and the National Development and Reform Commission issued the GB 19217-2003 "Technical Requirements for Medical Waste Transfer Vehicles (Trial)". This standard is specific to medical waste transfer vehicles. The performance requirements were clearly defined, and environmental protection technical requirements such as compartment sealing, bottom impermeability, and interior surface corrosion protection were proposed. After the standard was issued, it immediately became a bid for medical waste transfer vehicles to fight against SARS. The basis of purchase.
Production status of medical waste transfer vehicles The medical waste transfer vehicles are all modified cars. The main reason for this is that the production plant is properly adapted to the requirements of the standard on the basis of the established car chassis or van, according to the characteristics of medical waste transportation and environmental protection. Special requirements, to increase the vehicle's corrosion resistance, sealability and other safety protection performance. Through the investigation of the production plant learned that 2003 was the highest year of medical waste transfer vehicle production. According to incomplete statistics, there are about ten national Most of the major medical waste transfer vehicle production plants have their output concentrated in 2003, after which the demand has decreased significantly, and all production plants are basically order-based production.
Trends in the future production of medical waste transfer vehicles In early 2004, approved by the State Council, the National Development and Reform Commission and the former State Environmental Protection Administration jointly issued the “National Hazardous Waste and Medical Waste Disposal Facility Construction Plan†(hereinafter referred to as the “Planningâ€), and local medical wastes have begun to take place. Disposal facilities construction project bidding work, and require the transport of medical waste vehicles to meet the requirements of GB 19217-2003. "Planning" pointed out that China will plan to build a centralized medical waste disposal facilities 300, the new medical waste disposal capacity of 2080 tons / With the gradual construction of various medical waste centralized disposal facilities, the demand for medical waste transfer vehicles will also gradually increase. In addition, the use of medical waste transfer vehicles is similar to buses, sanitation and other operating vehicles, and they are scrapped and arrived in vehicles. If the service life is updated or replaced, or if the use demand increases, there will be demand for medical waste transfer vehicles, but the output will not be too large. Although the output is not large, with the implementation of the “planningâ€, the construction of disposal stations will gradually Implementation, medical waste collection, transportation, and disposal will become increasingly standardized, and medical waste transfer vehicles will also be used as a dedicated Kind of a long time.
Medical waste transfer vehicles: medical waste transfer vehicles also known as: medical garbage transport vehicles, medical waste transport vehicles, medical garbage collection vehicles, medical waste transfer vehicles and other names.
Medical waste transfer vehicle features: According to the characteristics of medical waste design, the use of closed transport, the back door is a double sealed structure, and the use of labyrinth seals, so that the compartment completely closed, in order to prevent the spread of toxic gas in medical waste bacteria. Wall panels are made of stainless steel, which can be sterilized by corrosive disinfection. Around the bottom of the cabin and round the corners, it is advisable to clean the corners for disinfection. The body of the vehicle has a UV disinfection function. When the UV lamp works normally, it radiates a large amount of ultraviolet rays of 253.7 nm, which is extremely powerful against microorganisms and kills bacteria within 30-45 minutes. The product has closed, impervious, dust-proof properties; antibacterial, fire-retardant, corrosion-resistant, easy cleaning and disinfection functions. According to the “Regulations on Medical Waste Managementâ€, medical waste transfer vehicles must use special vehicles with “medical waste†signs and environmental protection requirements. Sterilization of medical waste transfer vehicles: Anti-virus at low temperature, anti-virus by ultraviolet light and anti-virus by spray of drugs. Medical waste transfer vehicles are classified by chassis type: Changan Star Medical Waste Transfer Vehicle Dongfeng Jinba Medical Waste Transfer Vehicle Jiangling Medical Waste Transfer Car Qingling Medical Waste Transfer Vehicle Liberation Medical Waste Transfer Vehicle Medical waste transfer vehicles are sorted by tonnage size: 0.5T medical waste transfer vehicle 1T medical waste transfer vehicle 1.5 medical waste transfer vehicle 2T medical waste transfer vehicle
Background of medical waste transfer vehicles: In 2003, the outbreak of SARS broke out in China and spread rapidly throughout the country. All medical institutions became the first battlefield against SARS. SARS spreads through droplets and is very infectious. Meanwhile, a large number of The patients have produced a large amount of medical waste. For this kind of medical waste that may carry highly infectious pathogens, transportation and treatment processes must be strictly protected to prevent the spread of germs. At that time, China's medical waste disposal In the state of insufficient long-term attention, the construction of centralized disposal facilities lags behind seriously, the loss of medical wastes is serious, a large amount of medical wastes are mixed into domestic garbage, medical wastes are collected, transferred, and storage is not standardized, there is no classification collection, no special packaging materials and containers, and no special The pollution of transport vehicles during transportation cannot be completely avoided, especially in the period of SARS, the hazards are even more obvious, and the situation of ensuring environmental security and people's health is very serious. It is precisely in this situation that, based on the need to respond to atypical pneumonia, it is imperative to regulate the transportation of medical wastes and to ensure the safety of transportation. At that time, the State Environmental Protection Administration issued an emergency task of formulating the “Technical Requirements for Medical Waste Transfer Vehiclesâ€. In May 2003, the State Environmental Protection Administration and the National Development and Reform Commission issued the GB 19217-2003 "Technical Requirements for Medical Waste Transfer Vehicles (Trial)". This standard is specific to medical waste transfer vehicles. The performance requirements were clearly defined, and environmental protection technical requirements such as compartment sealing, bottom impermeability, and interior surface corrosion protection were proposed. After the standard was issued, it immediately became a bid for medical waste transfer vehicles to fight against SARS. The basis of purchase.
Production status of medical waste transfer vehicles The medical waste transfer vehicles are all modified cars. The main reason for this is that the production plant is properly adapted to the requirements of the standard on the basis of the established car chassis or van, according to the characteristics of medical waste transportation and environmental protection. Special requirements, to increase the vehicle's corrosion resistance, sealability and other safety protection performance. Through the investigation of the production plant learned that 2003 was the highest year of medical waste transfer vehicle production. According to incomplete statistics, there are about ten national Most of the major medical waste transfer vehicle production plants have their output concentrated in 2003, after which the demand has decreased significantly, and all production plants are basically order-based production.
Trends in the future production of medical waste transfer vehicles In early 2004, approved by the State Council, the National Development and Reform Commission and the former State Environmental Protection Administration jointly issued the “National Hazardous Waste and Medical Waste Disposal Facility Construction Plan†(hereinafter referred to as the “Planningâ€), and local medical wastes have begun to take place. Disposal facilities construction project bidding work, and require the transport of medical waste vehicles to meet the requirements of GB 19217-2003. "Planning" pointed out that China will plan to build a centralized medical waste disposal facilities 300, the new medical waste disposal capacity of 2080 tons / With the gradual construction of various medical waste centralized disposal facilities, the demand for medical waste transfer vehicles will also gradually increase. In addition, the use of medical waste transfer vehicles is similar to buses, sanitation and other operating vehicles, and they are scrapped and arrived in vehicles. If the service life is updated or replaced, or if the use demand increases, there will be demand for medical waste transfer vehicles, but the output will not be too large. Although the output is not large, with the implementation of the “planningâ€, the construction of disposal stations will gradually Implementation, medical waste collection, transportation, and disposal will become increasingly standardized, and medical waste transfer vehicles will also be used as a dedicated Kind of a long time.
Auxiliary Machine,Auxiliary Equipment,Plastic Auxiliary Machine,Plastic Auxiliary Machinery
Jinan Stone Machine Co., Ltd. , https://www.jnstonema.com