Multi-stage checkweigher structure analysis:
1. Conveyor Conveyor consists of conveyor and weighing unit. There are many types of conveyors, which can be belt, chain, or roller based, depending on the type of object being transported. The size of the conveyor depends on the size of the object being weighed. Multi-stage checkweighing The weighing platform itself is a stand-alone, small conveyor that weighs the items as they are passed through the conveyor. Due to dynamic metering, the speed of metering is higher. The transmission part of the conveyor adopts a three-in-one electric roller (ie motor, reducer and roller as a whole), which can make the weighing platform compact in structure, reasonable in layout and beautiful in appearance.
2. Load cell load cell There are many types of load cell, such as: differential transformer type, resistance strain type and electromagnetic balance type. The precision series multi-stage checkweigher uses the most widely used resistance strain sensor. Its advantages are low price, multiple product types and good stability. The weighing platform formed by the conveyor is placed on the sensor, and the number of sensors is determined according to the size of the weighing platform. The large-sized and large-sized table tops are supported by four sensors, and the performance is stable and reliable; the small-scale, small-sized table can be used. Select a single sensor support table.
3. Display the weight signal sent from the control symmetry sensor to perform amplification, operation processing, and digital display of the weight value, and compare the weight data with the preset value, and then issue the underweight, overweight, and qualified control signals. The limits for underweight and overweight can be set manually. The display control meter can display the difference between the gross weight, the net weight, the last weighing value, the last weighing value and the setting nominal value. The total number of weighings, the number of underweights, the number of overweights, and the number of qualified items can also be displayed. The display controller can also deliver a variety of statistical information and can use the communications interface to network useful information to a management computer or print out reports via a printer.
4, remove the device (optional)
According to the packaged form and characteristics of the inspected article, the reject device can be divided into multiple ways such as launch, tipping, dropping, handling, diverting, etc., and the detected rejected articles can be excluded from the production process.
The above gives us a detailed introduction to the structure of multi-stage checkweighers. If you have any questions, please come to our company for advice. We will serve you 24 hours online! Thank you for your great support!
On the basis of ordinary carbon steel, an appropriate amount of one or more alloying elements is added to form special alloy steel, such as chromium, tungsten, manganese, nickel and other elements. According to the difference of added elements and appropriate processing technology, special properties such as high strength, high toughness, wear resistance, corrosion resistance, low temperature resistance, high temperature resistance, and non-magnetic properties can be obtained. The special alloy castings produced by investment casting with these special alloy materials also have corresponding special properties. We can add corresponding special elements according to the specific use requirements of the product to cast Investment Casting Parts with special functions. Because investment casting requires molten material, which makes it easier to add special elements, special alloy parts are particularly suitable for investment casting.
SCZY can customize castings with special functions according to the special requirements of customers. We can not only improve and enhance the properties of castings during the casting process, but also add special elements to the materials to improve and enhance the special properties of castings. It can provide any value-added services after casting.
Special Alloy Casting,Special Alloy Casting Parts,Special Alloy Casting Machinery Parts,Special Alloy Castings For Automobile Industry,Special alloy castings
Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com