From the textile machinery enterprises learned that there have been some new demands in the textile machinery market this year. The demand for high-end equipment in China's cotton textile companies is constantly increasing, and textile machinery is gradually becoming intelligent and high-end. The term “green environmental protection†is also used in Each link. So, what exactly is this year's textile market? Where will the future development go?
It is understood that in 2009, despite the sharp decline in textile exports in the international market, with the Asian textile industry recovering, demand for textile machinery also began to pick up, and most shipments of the international textile machinery industry have flowed to Asia. In 2009, the top five countries and regions for textile machinery imports were concentrated in Asia, accounting for 56.62% of the total global textile machinery imports. In Asian textile machinery market, the development momentum in the next three years is optimistic.
Historically, professional trade fairs have been an opportunity for people in the industry to collect industry information and understand trends. The Textile Machinery Show is naturally no exception. The 2010 China International Textile Machinery Exhibition and the ITMA Asia Exhibition have ended. Analytical experts also gave professional analysis. It was learned that the market demand was mainly reflected in the further improvement of the demand for equipment, and the demand for high-efficiency, high-quality, high-automation, and energy-saving equipment continued to grow. Sandro Salmoiraghi, chairman of the Italian Textile Machinery Association, emphasized that the future direction of Italian textile machinery will focus on energy conservation and environmental protection and contribute to ecologically sustainable development. With the rising prices of various raw materials in the international market such as oil, natural gas, electricity, and water, energy has become the third largest cost input after raw materials and capital. Therefore, energy efficiency is the same for all aspects of textiles. A challenge that must be faced. The energy saving and emission reduction of China's textile industry, elimination of outdated production capacity, encouragement of innovation and application of new technologies are in line with the development strategy of energy-saving and environmental protection for textile machinery enterprises.
The data explain market conditions Italian textile machinery orders increased by 41% in the first quarter of 2010, with orders from China increasing by 110% to 70 million euros, and India's growth by 78% to 23 million euros. In the first quarter of this year, German textile machinery orders increased by 130%. It is expected that German textile machinery sales this year will increase by 30% to 35% over 2009.
In the second quarter of 2010, the industrial control index of China's textile machinery industry showed an upward trend compared with the same period of 2008, reaching 119. In the second quarter of 2010, the market size of automation products in the textile machinery industry exceeded 800 million yuan, an increase of 46.8% year-on-year, and an increase of 7.5% from the previous period; The most popular applications are over 40%, and HMI applications are the least, accounting for only 6%. In the second quarter of 2010, the textile machinery industry experienced a slight increase, which was a year-on-year increase of around 10% and a year-on-year increase of more than 50%. From the perspective of domestic sales, the industry's sales in the second quarter of 2010 were mainly concentrated in East China, South Central and North China, accounting for 98% of the total. Domestic demand in Jiangsu, Zhejiang, Fujian, and Xinjiang was strong.
Shishi Market is a textile machinery industry recently, and well-known textile machinery companies at home and abroad have a beach lion market. Recently, the Shishi textile machine professional market in Fujian Province received an incoming call from Shanxi Jingwei Heli Machinery Manufacturing Co., Ltd., intending to enter Shishi, and selected the market as its own sales headquarters in Fujian. At the same time, giant sewing and dyeing and finishing equipment manufacturers, such as Yokobuk Müller and Hong Kong Ericsson Group, have also repeatedly extended their olive branches to the market in an attempt to beach lions. At present, Shishi textile and apparel companies are undergoing transformation and upgrading, so there is a huge professional equipment consumer market, especially those that meet the needs of small batch, multi-species, deep-processing, high-grade textile and apparel industries, as well as dyeing and finishing with high efficiency, energy saving, and reduced labor advantages. Sewing equipment is good. In the face of continued improvement in the market, air-jet looms, computerized flat knitting machines, and printing and dyeing equipment with energy-saving and emission-reduction functions that can improve product quality and production efficiency have maintained strong sales this year.
It is understood that more and more textile machinery manufacturers have begun to pay attention to the huge equipment consumption market of Shishi and surrounding areas. Recently, Shishi Textile Machinery's professional market reached an agreement with more than 100 manufacturers of textile machinery equipment, of which more than 20 were well-known textile machinery companies at home and abroad.
Textile Machinery: Survival of the fittest At the same time, rising domestic labor costs also force companies to increase labor productivity and reduce employment through new technologies and new equipment. After a period of rapid development, the Chinese textile industry has been committed to the adjustment and upgrading of the industrial structure. The momentum of the expansion of production scales has gradually slowed down, and the demand for renewal and transformation has obviously increased. At present, the Pearl River Delta textile industry is ushering in a new wave of machine substitutions. In 2005, the number of CNC looms used by Dalang Town’s woolen garment manufacturing enterprises was only 2,000, which increased to 4,000 in 2008 and 6,000 in 2009. A company has calculated accounts. At present, the wages of workers in the textile industry are generally between 1,500 and 1800 yuan (higher than that of skilled workers). With meals and accommodation, each worker spends at least 2,000 yuan per month, each adding a computerized horizontal loom. The labor cost can be reduced to 1/6—1/8 of the original. A machine can be 80,000 to 150,000, and it can be returned in one or two years. The plug-in machine that directly replaces the artificial plug-in is more cost-effective. On the premise of the same monthly production capacity, a set of machine assembly lines requires 3 workers, while a traditional hand-inserted production line requires 14 skilled workers, which is calculated at a monthly salary of 1,500 yuan per person. The use of a machine for one year can save labor costs. 200,000. It can be seen that the input-output ratio brought by the intelligent spinning machine to the enterprise is obvious.
At present, textile companies are in full swing in innovation, which is an excellent opportunity for textile machinery companies. The increasing demand for high-end products by textile companies has led to the shortage of textile machinery companies and the shortage of supply in the market. The upgrading of the textile industry in the future will be faster and faster. Textile machinery companies need to be prepared.
It is understood that in 2009, despite the sharp decline in textile exports in the international market, with the Asian textile industry recovering, demand for textile machinery also began to pick up, and most shipments of the international textile machinery industry have flowed to Asia. In 2009, the top five countries and regions for textile machinery imports were concentrated in Asia, accounting for 56.62% of the total global textile machinery imports. In Asian textile machinery market, the development momentum in the next three years is optimistic.
Historically, professional trade fairs have been an opportunity for people in the industry to collect industry information and understand trends. The Textile Machinery Show is naturally no exception. The 2010 China International Textile Machinery Exhibition and the ITMA Asia Exhibition have ended. Analytical experts also gave professional analysis. It was learned that the market demand was mainly reflected in the further improvement of the demand for equipment, and the demand for high-efficiency, high-quality, high-automation, and energy-saving equipment continued to grow. Sandro Salmoiraghi, chairman of the Italian Textile Machinery Association, emphasized that the future direction of Italian textile machinery will focus on energy conservation and environmental protection and contribute to ecologically sustainable development. With the rising prices of various raw materials in the international market such as oil, natural gas, electricity, and water, energy has become the third largest cost input after raw materials and capital. Therefore, energy efficiency is the same for all aspects of textiles. A challenge that must be faced. The energy saving and emission reduction of China's textile industry, elimination of outdated production capacity, encouragement of innovation and application of new technologies are in line with the development strategy of energy-saving and environmental protection for textile machinery enterprises.
The data explain market conditions Italian textile machinery orders increased by 41% in the first quarter of 2010, with orders from China increasing by 110% to 70 million euros, and India's growth by 78% to 23 million euros. In the first quarter of this year, German textile machinery orders increased by 130%. It is expected that German textile machinery sales this year will increase by 30% to 35% over 2009.
In the second quarter of 2010, the industrial control index of China's textile machinery industry showed an upward trend compared with the same period of 2008, reaching 119. In the second quarter of 2010, the market size of automation products in the textile machinery industry exceeded 800 million yuan, an increase of 46.8% year-on-year, and an increase of 7.5% from the previous period; The most popular applications are over 40%, and HMI applications are the least, accounting for only 6%. In the second quarter of 2010, the textile machinery industry experienced a slight increase, which was a year-on-year increase of around 10% and a year-on-year increase of more than 50%. From the perspective of domestic sales, the industry's sales in the second quarter of 2010 were mainly concentrated in East China, South Central and North China, accounting for 98% of the total. Domestic demand in Jiangsu, Zhejiang, Fujian, and Xinjiang was strong.
Shishi Market is a textile machinery industry recently, and well-known textile machinery companies at home and abroad have a beach lion market. Recently, the Shishi textile machine professional market in Fujian Province received an incoming call from Shanxi Jingwei Heli Machinery Manufacturing Co., Ltd., intending to enter Shishi, and selected the market as its own sales headquarters in Fujian. At the same time, giant sewing and dyeing and finishing equipment manufacturers, such as Yokobuk Müller and Hong Kong Ericsson Group, have also repeatedly extended their olive branches to the market in an attempt to beach lions. At present, Shishi textile and apparel companies are undergoing transformation and upgrading, so there is a huge professional equipment consumer market, especially those that meet the needs of small batch, multi-species, deep-processing, high-grade textile and apparel industries, as well as dyeing and finishing with high efficiency, energy saving, and reduced labor advantages. Sewing equipment is good. In the face of continued improvement in the market, air-jet looms, computerized flat knitting machines, and printing and dyeing equipment with energy-saving and emission-reduction functions that can improve product quality and production efficiency have maintained strong sales this year.
It is understood that more and more textile machinery manufacturers have begun to pay attention to the huge equipment consumption market of Shishi and surrounding areas. Recently, Shishi Textile Machinery's professional market reached an agreement with more than 100 manufacturers of textile machinery equipment, of which more than 20 were well-known textile machinery companies at home and abroad.
Textile Machinery: Survival of the fittest At the same time, rising domestic labor costs also force companies to increase labor productivity and reduce employment through new technologies and new equipment. After a period of rapid development, the Chinese textile industry has been committed to the adjustment and upgrading of the industrial structure. The momentum of the expansion of production scales has gradually slowed down, and the demand for renewal and transformation has obviously increased. At present, the Pearl River Delta textile industry is ushering in a new wave of machine substitutions. In 2005, the number of CNC looms used by Dalang Town’s woolen garment manufacturing enterprises was only 2,000, which increased to 4,000 in 2008 and 6,000 in 2009. A company has calculated accounts. At present, the wages of workers in the textile industry are generally between 1,500 and 1800 yuan (higher than that of skilled workers). With meals and accommodation, each worker spends at least 2,000 yuan per month, each adding a computerized horizontal loom. The labor cost can be reduced to 1/6—1/8 of the original. A machine can be 80,000 to 150,000, and it can be returned in one or two years. The plug-in machine that directly replaces the artificial plug-in is more cost-effective. On the premise of the same monthly production capacity, a set of machine assembly lines requires 3 workers, while a traditional hand-inserted production line requires 14 skilled workers, which is calculated at a monthly salary of 1,500 yuan per person. The use of a machine for one year can save labor costs. 200,000. It can be seen that the input-output ratio brought by the intelligent spinning machine to the enterprise is obvious.
At present, textile companies are in full swing in innovation, which is an excellent opportunity for textile machinery companies. The increasing demand for high-end products by textile companies has led to the shortage of textile machinery companies and the shortage of supply in the market. The upgrading of the textile industry in the future will be faster and faster. Textile machinery companies need to be prepared.
Antimony Iii Oxide,Diantimony Trioxide,Pure Diantimony Trioxide,Antimony Trioxide 99.8% Min
HUNAN ZHONGNAN ANTIMONY&TUNGSTEN TRADING CO.,LTD , https://www.zhongnanats.com