The cooling of turbomolecular pump with S&A CW-5200AIS water chiller

Persisting in the principle of holding responsibility to ourselves and customers, Teyu is trying the best to satisfy the customer`s requirement and provide feasible suggestion to reach a win-win situation.
Upon contactingTeyu, the customer had already sent the cooling requirement and the technical data sheet of HIPACE400turbomolecular pump that would be cooled to us via email. The preliminary choice made by the customer was CW-3000AF water chiller. However they also wished to receive some professional suggestion or recommendation from Teyu.
In order to cool their turbomolecular pump, the water chiller must meet the following conditions: 1KW cooling capacity at a target water temperature of 25°C and an ambient temperature of 25°C, a temperature range from 18°C to 35°C and a water flow rate of 2L/min. As S&A CW-3000AF water chiller cannot satisfy the cooling requirement of HIPACE400turbomolecular pump in terms of temperature range, Teyu sincerely recommends CW-5200AIS water chiller that is the most suitable to them as our responsibility to the customer.
There is feasibilityfor Teyu to recommendCW-5200AIS water chiller to cool HIPACE400turbomolecular pump. After the careful consideration, the customer finally chose CW-5200AIS water chiller.
Thank you so much for your support and trust in Teyu. All of the S&A water chillers have passed the ISO, CE, RoHS and REACH certification with the warranty period having been extended to 2 years. S&A water chiller is worthy of your trust.
With the development of a well-established experimental test system for the simulation of water chiller operation environment and the high temperature test, Teyu is dedicated to the continuous improvement of quality just for the purpose to make the customers rest assured. Also with the construction of a complete material procurement ecosystem and the adoption of bulk production mode, Teyu has achieved an annual production capacity of 60000 water chillers as a guarantee for your confidence in us.
The technical parameter of CW-5200: http://Products/ChillerCW52001400Wco.html

chiller

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:

Website: http://

Desktop Laser Machine

Desktop laser machine

UTECH Desktop Mini Laser Engraver is equipped with Texas 32 Bit DSP control system, there is a Flash memory on the mother board, you can download the work file to the machine via USB cable.
Mini Laser Engraver is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes, toys, and etc.

Desktop Laser Engraving Machine feature:

1. Adjustable Speed and Power, Smooth and Precise Engraving and Cutting
2. USB Interface
3. Air Assist, Remove heat and combustible gases from the cutting surface.
60W Air pump
4. Embedded Exhaust Fan, Easier intall, Safer transport.
40W exhaust fan, flow can be 5.27m³\Min.
5. Rotary Axis, Engrave any cylindrical object.
6. Aluminum table platform, Leave no chippings on working area.
7. LCD english Panel and DSP control system, easy to operate
8. Water Cooling and Protection System.
The tube will not work without water, to protect laser tube.
9. Advanced Red cross position. easy to identify laser position.
10. Emergency Stop Button.
11. Lift handle on side, easy to lift the machine.
12. Manual or Electircal up down table optional
13. Taiwan Imported Hiwin linear rail transmission
14. Laser focal length: 50.8mm
15. Limit switch on front door & laser tube cover, once open any cover, it will stop work.
16. Machine service life: 1000-1500H for laser tube, 3-5 years for machine body.


Available Industries:
Marble engraving , tombstone carving , stone engraving , advertisements , packing and printing , molding and art craft industries.

Customized model:

UT-1490/1610/1325/1318, etc.


<

Model UT-2030/3050/4060
Laser tube Water cooling Co2 sealed glass
Control system 32 Bit DSP with Flash memory
Drive type Stepper motor
Laser Power 50W/60W
Working Size (mm) 200*300/300*500/400*600
Adjust Table (mm) 200
Max speed 800 mm/s
Image form Plt, Dxf, Bmp, Ai, Dst
Resolution 1000 DPI
Repeatability 0.01 mm
PC Interface USB 3.0 and USB Disk
Power 110~240V/ 50~60Hz
Warranty 12 Months


acrylic laser cutting machine


mini engraving machine

Desktop Laser Machine,Desktop Laser Cutter,Desktop Laser Cutting Machine ,Desktop Laser Engraving Machine

Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com