More than a decade ago, Suzhou's mold industry was still quite weak. There were only a few hundred production plants, processing equipment was behind, production technology was not high, product varieties were single, and standardization and commercialization were very low. As Suzhou has gradually become a national manufacturing base, the rapid development of electronic information, optoelectronics, automobiles, home appliances, light industry and plastics has strongly promoted the interactive development of the Suzhou mold industry, the rapid increase in the concentration of mold enterprises, Suzhou has become a domestic one One of the major emerging mold industry zones. Luo Baihui, a specialist in the mold industry, said that the development of the Suzhou mold industry has the following characteristics:
First, the number of mold enterprises is large and rapid development. In more than a decade, Suzhou's mold and die enterprises have grown from more than 100 to more than 2,000, and the speed of development has greatly exceeded the national average development rate of 14%.
Second, the characteristics of the mold enterprises are obvious, and the division of labor service is clear. Such as Zhenyuan Mould, Rixing Mould, and Huafeng Mould, etc., mainly manufacture household appliances, computer components, injection molds and blow molds for automotive interiors and exteriors, etc.; Maosen Fine Art, Suzhou Weiyan, etc. mainly produce various types of electronics and connectors. Photocopier parts such as precision stamping die and magnetic steel molding die; Chongcun steel mold, Hongshun die frame and other companies mainly produce all kinds of large mold, cold stamping die standard parts; Lampe casting, far light die, and other major production of automotive engines and Hubs and other parts die casting molds and molds.
Third, foreign-funded enterprises and privately-owned enterprises are all flying together. Due to the rapid development of Suzhou's export-oriented economy, Korea, Japan, the United States, Germany, Singapore and China's Taiwan and Hong Kong have more than 15,000 wholly-owned or joint ventures, many of which have mold manufacturing capabilities and have reached considerable levels and scale.
These enterprises have not only introduced foreign advanced equipment and moldmaking technology, but also have advanced mold talents at home and abroad, adopt advanced governance models, have a high starting point for technology, and mold standards are in line with international standards. For example, Suzhou Huizhong Molding Co., Ltd. has introduced advanced molding equipment and testing instruments from Japan, Italy, and other countries. It has also introduced computer workstations from the United States. Using cad/cam technology and low-pressure injection molding technology, it has been able to produce cars weighing 45 tons. Bumper injection mold, with an annual production capacity of more than 200 sets.
First, the number of mold enterprises is large and rapid development. In more than a decade, Suzhou's mold and die enterprises have grown from more than 100 to more than 2,000, and the speed of development has greatly exceeded the national average development rate of 14%.
Second, the characteristics of the mold enterprises are obvious, and the division of labor service is clear. Such as Zhenyuan Mould, Rixing Mould, and Huafeng Mould, etc., mainly manufacture household appliances, computer components, injection molds and blow molds for automotive interiors and exteriors, etc.; Maosen Fine Art, Suzhou Weiyan, etc. mainly produce various types of electronics and connectors. Photocopier parts such as precision stamping die and magnetic steel molding die; Chongcun steel mold, Hongshun die frame and other companies mainly produce all kinds of large mold, cold stamping die standard parts; Lampe casting, far light die, and other major production of automotive engines and Hubs and other parts die casting molds and molds.
Third, foreign-funded enterprises and privately-owned enterprises are all flying together. Due to the rapid development of Suzhou's export-oriented economy, Korea, Japan, the United States, Germany, Singapore and China's Taiwan and Hong Kong have more than 15,000 wholly-owned or joint ventures, many of which have mold manufacturing capabilities and have reached considerable levels and scale.
These enterprises have not only introduced foreign advanced equipment and moldmaking technology, but also have advanced mold talents at home and abroad, adopt advanced governance models, have a high starting point for technology, and mold standards are in line with international standards. For example, Suzhou Huizhong Molding Co., Ltd. has introduced advanced molding equipment and testing instruments from Japan, Italy, and other countries. It has also introduced computer workstations from the United States. Using cad/cam technology and low-pressure injection molding technology, it has been able to produce cars weighing 45 tons. Bumper injection mold, with an annual production capacity of more than 200 sets.
Sandy Thermosetting Powder Coating
Sandy Thermosetting Powder Coating,sand Thermosetting Coating,Thermoset Powder Coating Process
Longkou Guomei Decoration Material Co.,Ltd. , https://www.sdgmcoating.com