As we all know: Among the energy consumption of factories, lighting energy consumption accounts for a large proportion. In the selection of factory lighting, how to achieve energy saving and environmental protection is the most considered when we design LED high bay lights. In addition to energy saving and environmental protection, LED industrial and mining lamps have the advantages of long life, fast response time, concentrated light and pure light, etc., in addition to energy saving and environmental protection. Here we will introduce the specific advantages of LED high bay lights for plant lighting, as follows:
LED industrial and mining lamp lighting design In the design of LED light source, it lays a solid foundation for high-power: LED lamp design. Due to the large differences in the application products of the same LED light source, the design and testing standards have a certain lag, Therefore, the products produced by different manufacturers are less interchangeable in terms of structure and performance. At the same time, the LED lamp product itself is an integration of machine, light, electricity and other factors, and its design involves technology in many fields.
Compared with high-pressure sodium lamps or metal halide lamps for plant lighting, the initial investment cost of LED industrial and mining lamps is obviously much higher than traditional lamps. However, because the LED light source has the characteristics of high light efficiency, and when it is made into a lamp, the advantage of the strong directivity of the LED light source is easily reflected. The efficiency of the LED high bay lamp is much higher than that of the traditional lamp, so its energy saving feature is Can be clearly reflected.
Key technologies: New technologies, new materials and new processes are continuously applied to high power; LED factory lights can be divided into general lighting and local lighting according to their bright functions. In addition to energy saving and environmental protection, the LED plant light lighting based on the new LED light source has the advantages of long life, fast response time, concentrated light and pure light, etc. In recent years, it has been favored by consumers. The specific functions of LED plant lights are as follows:
Plant lights are generally arranged above or on the side wall of the work site to illuminate the entire working surface. It is necessary to use incandescent lamps, tungsten halogen lamps, high-pressure gas discharge lamps or a large number of fluorescent lamps with high power.
LED plant light is a kind of lamp that can improve the illuminance of a certain working part. Its function is to strengthen and supplement lighting on the basis of general lighting, or it can be used for temporary lighting in places where lighting is not usually needed. Local lighting is usually installed near the work area, using safe, extra-low voltage (≤50V, AC effective value) incandescent lamps, halogen lamps as light sources. There are (portable) running lights, hanging lights, work desk lights, machine tool work lights, etc. In some tall buildings, spotlights are sometimes used for local lighting.
Increasing the outer diameter of Heatsink while reducing the height of Fin can obtain a more effective heat dissipation effect. For the same weight of Heatsink, the height is higher than that of increasing the diameter of the radiator. The latter can achieve more effective heat dissipation Case4Thermal, We reduce the height of Fin to increase the outer diameter of the radiator, and get a good radiator with the same cost.
Among the energy consumption of the factory, lighting energy consumption occupies a certain amount. In addition to energy saving and environmental protection, the LED plant light lighting based on the new LED light source has the advantages of long life, fast response time, concentrated light and pure light, etc. In recent years, it has been favored by consumers.
Pipe Tools
Pipe fabrication can be defined as the process of cutting, bevelling, and welding piping components such as pipes, tees, elbows, flanges, reducers, etc., as dictated by the design documents. Various types of plastic tools and equipments are used that helps in process of piping fabrication activities There are three main types of Polyethylene Pipe Fusion Methods: 1.Butt Fusion. Butt fusion is the most common method of fusing HDPE pipes. 2. Electrofusion. Another way to fuse two segments of pipe is electrofusion. 3. Socket Fusion. Socket fusion involves heating the spigot end of one pipe and the socket end of a fitting. So pipe tools of HDPE Fusion Equipments are different. HDPE Pipe Cutter, Inner Debeader, External Debeader, HDPE Pipe Squeezing Tool,Pipe Cutting and Bevelling Equipment etc are used for HDPE/Poly Pipe Butt Fusion Machines; Pipe Scraper and Electrofusion Clamps are used for HDPE Electrofusion Machines. Pipe Depth Gauge, Plastic Pipe Shear and Plastic Pipe Cutters are used for PPR Pipe Socket Fusion Welding Kit. For more Pipe Fabrication tools requirement, you can contact us freely.
Pipe Tools,Pipe Cutter,Tube Cutter,Pipe Cutting Tool
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com