- Model NO.: CS1070T
- Pressure: High Pressure Mechanical Seals
- Temperature: Temperature Mechanical Seal
- Standard: Standard, Nonstandard
- Balance: Balanced
- Working Temperature: 200deg
- Recovery: >40%
- Trademark: ClingSeal
- Specification: 500*1000-1500*1500
- HS Code: 8484100000
- Structure: Single End
- Speed: General Speed Mechanical Seal
- Performance: High Pressure
- Type: CS1070t
- Density: 2.1-2.2g/cm3
- Compressibility: 8-18%
- Thickness: 1.0-3.0mm
- Transport Package: Ply-Woode Case
- Origin: China
From this page you can purchase reinforced non asbestos sheets from 1.0 to 3mm thickness. Remember that as a general rule you should select the thinnest material possible for your application.General Properties of non asbestos gasket sheet is made from two sides non asbestos beater sheet with 0.2-0.25mm perforated metal insert. It generally used in high temperature and high pressure environments, and commonly finds applications in steam cycling or exhaust applications.If you can't find what you're looking for, of require a bespoke material, please do not hesitate to contact us.Is reinforced non asbestos gasket sheet the Best Material for My Application? If you are unsure as to which material is best for your application then you can consult our gasket material selector, or our guide to rubbers. Material specifications can be downloaded from the link on the left of this page.Alternatively, we are always happy to offer technical help and advice and so if you require assistance then please do not hesitate to contact us.
Product Formation:
It made from two sides non asbestos beater sheet with perforated metal insert. Metal usual be 0.2-0.25mm carbon steel, called tinplate. It also can be ss201, 304,316.
Product Features:
·Good adaptability and durability, good sealing, no delamination, high yield
·An economical sealing gasket and exhaust, manifold gasket material
·Good oil-resistance. Notice: Can't suitable for water
·Proved by ISO9001 UKAS,100% no asbestos
Product  Application:
It suitable for oil sealing and gasket, cylinder head gasket
Product Size:
Thickness-------1.0-6.0mm Notice: While thicker, it can be 3+2 type(Product section from top to bottom in order are Paper-Metal-Paper-Metal-Paper) and Multi paper bonding technology
Size---500*500mm;500*1000mm;500*1500mm;1000*1000mm;1000*1500mm
Size can be customized by clients.
Physical Property:
Item |
 |
 | |
Compressibility |
% |
8-18 |
|
Recovery |
% |
≥40 |
|
Tensile Strength |
MPa |
≥30 |
|
150ºC,At IRM903# for 5hours |
Weight Increase |
% |
≤10 |
Thickness Increase |
% |
≤15 |
|
At 21ºC~30ºC,ASTM B Fuel for 5hours |
Weight Increase |
% |
≤10 |
Thickness Increase |
% |
≤15 |
|
Product Technical Details
As a general rule, non asbestos gasket sheet is:
• Good for use with oil
• Good ozone resistance
• Good with natural gas
Customer Service
We are happy to answer any questions that you might have about this product. Please contact us for more information.
About Us
Cling-Seal Manufacturing co.Ltd. is a factory of manufacturing & export various gasket material and exhaust gasket in China. We have been sold our products for 12 years in China market, and 9 years in global market. We have more than 12 years experience in producing deferrent reinforced seal gasket paper.
 Ours main products are non-asbestos reinforced sheet, graphite reinforced sheet, double steel non asbestos (graphite) composite sheet, high quality reinforced perforated metal cylinder head gasket materials, flexible graphite gasket materials, compressed sheet jointing gasket materials, gasket filler materials etc. It is easy to cut gaskets at very cheap prices for a wide range of industries. Inserted metal could be tinplate or stainless steel. Thickness of tinplate is 0.18mm to 0.25mm. Thickness of stainless steel is 0.10mm (SS304,SS316),0.15mm (SS201).Â
 All of our products are extensively applied in petroleum, chemical industry, electrical power, metallurgy, automobiles, motorcycle, ship building, food, paper, mining, steel and pharmacy etc. which help user to solve the leak problem, now our products have been sold to Europe, Japan, South Korea, Taiwan, Singapore, South America, Middle-East and Africa etc. many countries and regions.
Working principle of integral Alternator
When the external circuit through the brush excitation winding is energized, it generates a magnetic field, the claw pole magnetized N pole and S pole. When the rotor rotates, flux alternately in the stator windings changes, according to the electromagnetic induction principle knowable, the stator three-phase winding produced alternating induced electromotive force. This is the alternator power generation principle.
The original motivation (i.e. engine driven DC excitation of synchronous generator rotor, with the speed of n (RPM) rotation, three-phase stator winding induction AC voltage. The stator winding if access to electricity load, motor with AC power output, after internal generator rectifier bridge will convert AC to DC power is output from the output terminal.
The content of AC generator stator winding and rotor winding and the three-phase stator winding according to the mutual difference distribution of 120 electrical degrees on the shell PTT and rotor winding is composed of two pieces of claw pole. When the rotor windings connect when DC is two pole excitation, the formation of N and S poles. Magnetic pole starting from N, through the air gap into the stator core to the adjacent S. Rotor once rotated, the rotor winding will cuts the magnetic lines of force and mutual difference of 120 electrical degrees of sinusoidal EMF in stator windings, the three-phase alternating current, again through the diode rectifier changed to DC output.
When the switch is closed, the current is supplied first by the battery. Circuit:
The positive battery, charging indicator, regulator, excitation winding, contact ground, negative battery. At this time, due to the current through the charging indicator light, so the exhibit of lanterns.
But after starting the engine, with the increasing speed of the generator, the terminal voltage of the generator is increasing. When the generator output voltage and the battery voltage is equal to the generator "B" and "d" end of equal potential. At the same time, the charging indicator due to the ends of the potential difference is zero and extinguished. The generator has been instructed to work properly, the excitation current is supplied by the generator itself.Generator three-phase winding three-phase AC electromotive force generated by the resistance after diode rectifier, DC output, power supply to the load and to the battery charging.
ISKRA Alternator, ISKRA Alternator Parts, ISKRA Alternators
NINGBO ZHONGWANG AUTO FITTINGS CO.,LTD , http://www.autostarter-alternator.com