700,000-ton/year reformer drinking mountain spring water

Recently, the reporter found that in order to reduce the production cost of the device, the technical engineers of the long-distance refining two-reformation area have cooperated in various ways, and adhered to the cost consciousness of “dry towels should also be screwed out of three drops of water”. After careful consideration, efforts were made to make the device The production used spring water.
The reforming unit is built on the mountain. On the east side, there is a flood drainage ditch along the side of the mountain with a mountainous area and a large oil tank area. Because of the long-term environmental protection, the mountains are full of luxuriant trees. There is a stream of spring water in the ditch. “Energy conservation and consumption reduction” has always been the eternal theme of oil refining installations. Can we accumulate this flowing stream as production water? To this end, the device has set up a technical analysis and processing team to carry out project approval, organize two technical management majors in process and equipment, and tackle all aspects of the project's technical issues. After multiple frequency tests and data theoretical studies, the spring water is cool, transparent and free from impurities, and the water quality is better than fresh water in the pipe network of the plant. It can be used as water for the production of the device. As a result, the equipment technical engineers designed and built a miniature overflow dam at the flat part of the flood drainage ditch, and equipped with multi-layer filter screens. The clear mountain spring water was directly injected into the production fresh water pipe network with a pump, allowing The device drank real fresh water from nature.
As a result of this initiative, 20 tons/hour of spring water can be injected into the device, which greatly reduces the water consumption of the device. At the same time, dams cut off the flow of mountains and rivers, reducing the potential for toxic and hazardous substances such as oils and alkalis in the border areas of the “washing” and “transportation” downstream devices of the landscape to enter large drainage bodies, reducing the possibility of passive pollution of downstream water bodies, and greatly improving the environment. Protection quality.

Dot Peen Marking Machine

Dot peen marking works by electromechanically striking a carbide or diamond stylus assembly against the surface of a part to be marked.For example,dog tag engraver.The result is a succession of dots to create digits, text, logos, and 2D data matrix codes. Each such dot is the result of a pulsed current that runs through a solenoid, punches a magnet toward the surface, and subsequently returns the stylus to its starting position, awaiting the next pulse. Because each pulse occurs in only a fraction of a second, an entire 2D data matrix code, for example, can be completed in seconds (depending on the size).
Notable Characteristics:
Cost effective
Requires no consumables
High speed accuracy
Will mark any material (including hardened steel)

Compressed air is not required.

Dot Peen Marking Machine,Pnematic Dot Peen Marking Machine,Pneumatic Marking Machine,Dot Markers,Dot Peen Marker,Dog Tag Engraver

Wuhan HAE Technology Co., Ltd. , https://www.whwallprinter.com