Description: It is heat exchanger parts  for many applications.  Air fin height and pitch can be adjustable (fin height3-11mm,fin pitch 8-20FPI) . oil channel height normally 3mm . designed with different parting sheet due to actual working pressure .
pressure tested before delivery .
delivery time :2weeks off season /3weeks high seasonÂ
package: carton box or PLY wooden case .
         DATA SHEET OF BAR
Â
Material :Aluminum Alloy 3003
|   Chemical Composition  % |
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | AL | |
| 0.0856 | 0.3505 | 0.0998 | 1.3002 | 0.0056 | 0.0048 Â Â | 0.0054 | 0.0156 | REM | ||
|
Mechanical Property  |
Tensile Strength | Stress | Elongation | |||||||
| 189Mpa | 82Mpa | 15% | ||||||||
                 Â
DATA OF FOIL
ALU ALLOY:3003
| Chemical Composition | Si | Fe | Cu | Mn | Mg | Zn | Ti | AL |
| Max | 0.6 | 0.7 | 0.2 | 1.5 | Â | 0.1 | Â | REM |
| Min | Â | Â | 0.05 | 1.0 | Â | Â | Â | Â |
| Real | 0.124 | 0.517 | 0.126 | 1.175 | 0.002 | 0.011 | 0.002 | REM |
Â
Mechanical Property
| Property | Tensile Strength | Stress | Elongation | Â |
| Max | 140 | Â | Â | Â |
| Min | 95 | 35 | 15% | Â |
| Real | 119.1 | 43.3 | 29.5% | Â |
Â
DATE OF PLATE
Â
ALU ALLOY:3003/4004
| Chemical composision | Si | Fe | Cu | Mn | Mg | Zn | Â |
| 4004 | 10.3 | 0.3 | 0.1 | 0.01 | 1.4 | 0.04 | Â |
 ALUMINUM PLATE AND BAR CORE
Description: It is heat exchanger parts  for many applications.  Air fin height and pitch can be adjustable (fin height3-11mm,fin pitch 8-20FPI) . oil channel height normally 3mm . designed with different parting sheet due to actual working pressure .
pressure tested before delivery .
delivery time :2weeks off season /3weeks high seasonÂ
package: carton box or PLY wooden case .
         DATA SHEET OF BAR
Â
Material :Aluminum Alloy 3003
|   Chemical Composition  % |
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | AL | |
| 0.0856 | 0.3505 | 0.0998 | 1.3002 | 0.0056 | 0.0048 Â Â | 0.0054 | 0.0156 | REM | ||
|
Mechanical Property  |
Tensile Strength | Stress | Elongation | |||||||
| 189Mpa | 82Mpa | 15% | ||||||||
                 Â
DATA OF FOIL
ALU ALLOY:3003
| Chemical Composition | Si | Fe | Cu | Mn | Mg | Zn | Ti | AL |
| Max | 0.6 | 0.7 | 0.2 | 1.5 | Â | 0.1 | Â | REM |
| Min | Â | Â | 0.05 | 1.0 | Â | Â | Â | Â |
| Real | 0.124 | 0.517 | 0.126 | 1.175 | 0.002 | 0.011 | 0.002 | REM |
Â
Mechanical Property
| Property | Tensile Strength | Stress | Elongation | Â |
| Max | 140 | Â | Â | Â |
| Min | 95 | 35 | 15% | Â |
| Real | 119.1 | 43.3 | 29.5% | Â |
Â
DATE OF PLATE
Â
ALU ALLOY:3003/4004
| Chemical composision | Si | Fe | Cu | Mn | Mg | Zn | Â |
| 4004 | 10.3 | 0.3 | 0.1 | 0.01 | 1.4 | 0.04 | Â |
Â
Heavy-duty hydraulic sheet metal shears are suitable for compressing and cutting thin & light materials, production and living scrap steel, light metal structural parts, scrap car body, wheel hub, old home alliances, plastic non-ferrous metals(stainless steel, aluminum alloy, copper, etc), or used to compress and bale the above mentioned materials.
The machine is able to:
A) Prepressing and cut scrap
B) Cut bars
C) Packages light scrap
D) Squeeze and cut car bodies
E) We updated the pump to HY type, which has more novel and reasonable structure, with low noise, flow is larger with same motor power.
Aluminum Sheets Shear, Steel Sheets Shear, Iron Sheets Shear, Metal Sheets Shear, Copper Sheets Shear
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-metalsrecycle.com