It may be that the clutch cannot be completely disengaged, and the gear shift mechanism of the transmission is normal. This fault can be eliminated by adjusting the clutch or replacing part of the clutch so that the clutch has the proper free clearance and separation clearance.
It may be that the fork is loose, the fork bending deformation is serious or the wear is serious. At this time, the shift lever has moved into place, and the shifting fork's movement is not in place, resulting in serious impact and hanging up. In this case, the transmission cover should be opened for inspection, maintenance, and replacement of the fork if necessary.
It may be that the positioning part of the shifting rod positioning ball head loses its function, the shifting rod can rotate freely around its own axis, and the gear position cannot be accurately controlled; the spherical working surface at the bottom of the shifting lever may also be worn off, and the shift lever cannot control the shifting fork or the dial Slots are used to make gears and picks unacceptable. For the former, troubles are eliminated through maintenance; for the latter, the shift lever must be replaced.
An excavator auger is a drilling attachment that is used with an excavator to bore holes in the ground. It is typically used in construction, landscaping, and agriculture for tasks such as installing fence posts, planting trees, and drilling for soil samples. The auger consists of a rotating drill bit that is attached to a shaft and powered by the excavator's hydraulic system. The excavator operator controls the speed and direction of the auger, allowing for precise drilling in various soil types and conditions. Augers come in various sizes and styles, including rock augers for drilling through tough terrain.
Excavator Auger Attachment,Excavator Earth Auger,Mini Excavator Auger,Excavator Auger Hydraulic
CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.tiltrotatorcatsu.com