High Pressure Fire Fighting Diesel Pump, Water Pump, Boosting Pump, Jockey Pump, Spray Pump, Electric Fire Pump

Posted on

Model NO.: XBC
Type: Jet Pump
Application: Clarified Water Pump
Theory: Centrifugal Pump
Position of Pump Shaft: Horizontal Pump
Influent Type of Impeller: Single Suction Pump
Trademark: SUOTO
Transport Package: Wooden Case
Origin: Shanghai, China
HS Code: 841301090
Model NO.: XBC
Type: Jet Pump
Application: Clarified Water Pump
Theory: Centrifugal Pump
Position of Pump Shaft: Horizontal Pump
Influent Type of Impeller: Single Suction Pump
Trademark: SUOTO
Transport Package: Wooden Case
Origin: Shanghai, China
HS Code: 841301090

XBC full-automatic diesel engine fire pump group as a fixed fire extinguishing equipment has been widely applied in fire shunt, in power or power is not normal and accident cases of fire water supply.In the unit with water pump for my company production of horizontal single stage, multistage fire special pump, the distribution of diesel engine are domestic internal combustion engine industry backbone enterprise the production of 495, 4135, X6135, 12 v135 etc series machines, according to user needs can also configuration into diesel engine as power machine. Mainly by diesel engine, fire pump, linkage, oil tank, radiator, storage battery, intelligent automatic control panel, etc.

Our factory developed by intelligent diesel engine pump products to unattended intelligent system for standard configuration. Products with advanced technology, high degree of automation, performance is superior to protect the function is all ready, reasonable structure, easy installation, the characteristics of high performance/price ratio. At the same time, to meet the different needs of users and reasonable investment, the product is divided into fire pump, industrial emergency water pump, agricultural water pump, Marine water pump, trailer flow water pumping station, and other application series.

Working conditions:
1. The sea dials height: 2500 meters or less
2. Environmental temperature: - 25 ~ 55 °C
3. Air relative humidity: 9 ~ 95%
4. Earthquake intensity: 7 degrees
5. Flow range: 50-700 (L/S)
6. Lift range: 32-600 m
7. Diesel engine power: 18-1100 kw
8. Flow components material: cast iron, nodular cast iron, stainless steel, cast copper.
9. Diesel engine brand: wood, dongfeng, cummins, deutz, wuxi power, diesel often hair, JiChai weichai, yuchai, etc.

Diesel engine pump group key features:
1. Automatic starting: diesel oil pumping unit received fire/pipe network pressure/power/or other start signal, in 5 seconds internal energy automatic starting and put into full load operation;
2. Automatic charging: battery available mains or diesel engine charging machine automatic charging and ensure its smooth starting;
3. Automatic alarm: on diesel engine low oil pressure, high temperature and fault automatic alarm protection, when in the overspeed alarm and stop;
4. Automatic preheating: make the diesel engine in a heat engine standby state, ensure emergency work;
5. Straight-through type: 360 kw diesel pump unit under the domestic origination of diesel engine and pump through the elastic coupling direct connection technology, reduce the fault point, and make unit start up time greatly shorten the, increased the unit reliability and emergency performance;
6. Users can also request setting other alarm output (non standard supply);
7. Has remote measure, remote communication, remote control function (non standard supply);
 

Modle FlowQ
(L/s)		 Pressure of outlet
(MPa)		 Speed
(r/min)		 Power (Kw) η
(%)
XBC3.0/5-50(65) 5 0.30 2900 4 63
XBC3.2/5-50(65) 0.32
XBC3.4/5-50(65) 0.34
XBC4.6/5-50(65) 5 0.46 2900 7.5 58
XBC4.8/5-50(65) 0.48
XBC5.0/5-50(65) 0.50
XBC7.6/5-50(65) 5 0.76 2900 15 50
XBC7.8/5-50(65) 0.78
XBC8.0/5-50(65) 0.80
XBC11/5-50(65) 5 1.10 2900 30 40
XBC12/5-50(65) 1.20
XBC12.5/5-50(65) 1.25
XBC3.0/10-65(80) 10 0.30 2900 7.5 71
XBC3.2/10-65(80) 0.32
XBC3.4/10-65(80) 0.34
XBC4.6/10-65(80) 10 0.46 2900 15 67
XBC4.8/10-65(80) 0.48
XBC5.0/10-65(80) 0.50
XBC7.6/10-65(80) 10 0.76 2900 22 59
XBC7.8/10-65(80) 0.78
XBC8.0/10-65(80) 0.80
XBC11/10-65(80) 10 1.10 2900 37 54
XBC12/10-65(80) 1.20
XBC12.5/10-65(80) 1.25
XBC3.0/25-80(100) 25 0.30 2900 15 76
XBC3.2/25-80(100) 0.32
XBC3.4/25-80(100) 0.34
XBC4.6/25-80(100) 25 0.46 2900 22 74
XBC4.8/25-80(100) 0.48
XBC5.0/25-80(100) 0.50
XBC7.6/25-80(100) 25 0.76 2900 37 69
XBC7.8/25-80(100) 0.78
XBC8.0/25-80(100) 0.80
XBC11/25-80(100) 25 1.10 2900 75 69
XBC12/25-80(100) 1.20
XBC12.5/25-80(100) 1.25
XBC13/25-80(100) 25 1.30 2900 90 57
XBC14/25-80(100) 1.40
XBC15/25-80(100) 1.50
XBC3.0/45-100(125) 45 0.30 2900 22 73
XBC3.2/45-100(125) 0.32
XBC3.4/45-100(125) 0.34
XBC4.6/45-100(125) 45 0.46 2900 37 77
XBC4.8/45-100(125) 0.48
XBC5.0/45-100(125) 0.50
XBC7.6/45-100(125) 45 0.76 2900 55 80
XBC7.8/45-100(125) 0.78
XBC8.0/45-100(125) 0.80
XBC11/45-100(125) 45 1.10 2900 90 70
XBC12/45-100(125) 1.20
XBC12.5/45-100(125) 1.25
XBC2.8/55-150(200) 55 0.28 1450 30 78
XBC3.0/55-150(200) 0.30
XBC3.2/55-150(200) 0.32
XBC4.6/55-150(200) 55 0.46 1450 45 75
XBC4.8/55-150(200) 0.48
XBC5.0/55-150(200) 0.50
XBC7.6/55-150 55 0.76 2900 75 76
XBC7.8/55-150 0.78
XBC8.0/55-150 0.80
XBC11/55-150 55 1.10 2900 110 73
XBC12/55-150 1.20
XBC12.5/55-150 1.25
XBC13/55-150 45 1.30 2900 110 80
XBC14/55-150 1.40
XBC15/55-150 1.50
XBC4.6/100-200 100 0.46 1450 75 81
XBC4.8/100-200 0.48
XBC5.0/100-200 0.50
XBC3.0/150-250 150 0.30 1450 75 80
XBC3.2/150-250 0.32
XBC3.4/150-250 0.34
XBC4.6/140-250 140 0.46 1450 90 72
XBC4.8/140-250 0.48
XBC5.0/140-250 0.50
XBC2.4/200-300 200 0.24 970 75 81
XBC2.6/200-300 0.26
XBC2.8/200-300 0.28
XBC2.8/200-300(350) 200 0.28 1450 90 84
XBC3.0/200-300(350) 0.30
XBC3.2/200-300(350) 0.32
XBC4.0/200-300 200 0.40 970 132 84
XBC4.2/200-300 0.42
XBC4.4/200-300 0.44
XBC4.6/160-300 160 0.46 1450 110 78
XBC4.8/160-300 0.48
XBC5.0/160-300 0.50
XBC4.6/200-350 200 0.46 1450 160 83
XBC4.8/200-350 0.48
XBC5.0/200-350 0.50
XBC2.8/300-400 300 0.28 1450 132 76
XBC3.0/300-400 0.30
XBC3.2/300-400 0.32
XBC2.8/330-500 330 0.28 1450 160 78
XBC3.0/330-500 0.30
XBC3.2/330-500 0.32

XBC full-automatic diesel engine fire pump group as a fixed fire extinguishing equipment has been widely applied in fire shunt, in power or power is not normal and accident cases of fire water supply.In the unit with water pump for my company production of horizontal single stage, multistage fire special pump, the distribution of diesel engine are domestic internal combustion engine industry backbone enterprise the production of 495, 4135, X6135, 12 v135 etc series machines, according to user needs can also configuration into diesel engine as power machine. Mainly by diesel engine, fire pump, linkage, oil tank, radiator, storage battery, intelligent automatic control panel, etc.

Our factory developed by intelligent diesel engine pump products to unattended intelligent system for standard configuration. Products with advanced technology, high degree of automation, performance is superior to protect the function is all ready, reasonable structure, easy installation, the characteristics of high performance/price ratio. At the same time, to meet the different needs of users and reasonable investment, the product is divided into fire pump, industrial emergency water pump, agricultural water pump, Marine water pump, trailer flow water pumping station, and other application series.

Working conditions:
1. The sea dials height: 2500 meters or less
2. Environmental temperature: - 25 ~ 55 °C
3. Air relative humidity: 9 ~ 95%
4. Earthquake intensity: 7 degrees
5. Flow range: 50-700 (L/S)
6. Lift range: 32-600 m
7. Diesel engine power: 18-1100 kw
8. Flow components material: cast iron, nodular cast iron, stainless steel, cast copper.
9. Diesel engine brand: wood, dongfeng, cummins, deutz, wuxi power, diesel often hair, JiChai weichai, yuchai, etc.

Diesel engine pump group key features:
1. Automatic starting: diesel oil pumping unit received fire/pipe network pressure/power/or other start signal, in 5 seconds internal energy automatic starting and put into full load operation;
2. Automatic charging: battery available mains or diesel engine charging machine automatic charging and ensure its smooth starting;
3. Automatic alarm: on diesel engine low oil pressure, high temperature and fault automatic alarm protection, when in the overspeed alarm and stop;
4. Automatic preheating: make the diesel engine in a heat engine standby state, ensure emergency work;
5. Straight-through type: 360 kw diesel pump unit under the domestic origination of diesel engine and pump through the elastic coupling direct connection technology, reduce the fault point, and make unit start up time greatly shorten the, increased the unit reliability and emergency performance;
6. Users can also request setting other alarm output (non standard supply);
7. Has remote measure, remote communication, remote control function (non standard supply);
 

Modle FlowQ
(L/s)		 Pressure of outlet
(MPa)		 Speed
(r/min)		 Power (Kw) η
(%)
XBC3.0/5-50(65) 5 0.30 2900 4 63
XBC3.2/5-50(65) 0.32
XBC3.4/5-50(65) 0.34
XBC4.6/5-50(65) 5 0.46 2900 7.5 58
XBC4.8/5-50(65) 0.48
XBC5.0/5-50(65) 0.50
XBC7.6/5-50(65) 5 0.76 2900 15 50
XBC7.8/5-50(65) 0.78
XBC8.0/5-50(65) 0.80
XBC11/5-50(65) 5 1.10 2900 30 40
XBC12/5-50(65) 1.20
XBC12.5/5-50(65) 1.25
XBC3.0/10-65(80) 10 0.30 2900 7.5 71
XBC3.2/10-65(80) 0.32
XBC3.4/10-65(80) 0.34
XBC4.6/10-65(80) 10 0.46 2900 15 67
XBC4.8/10-65(80) 0.48
XBC5.0/10-65(80) 0.50
XBC7.6/10-65(80) 10 0.76 2900 22 59
XBC7.8/10-65(80) 0.78
XBC8.0/10-65(80) 0.80
XBC11/10-65(80) 10 1.10 2900 37 54
XBC12/10-65(80) 1.20
XBC12.5/10-65(80) 1.25
XBC3.0/25-80(100) 25 0.30 2900 15 76
XBC3.2/25-80(100) 0.32
XBC3.4/25-80(100) 0.34
XBC4.6/25-80(100) 25 0.46 2900 22 74
XBC4.8/25-80(100) 0.48
XBC5.0/25-80(100) 0.50
XBC7.6/25-80(100) 25 0.76 2900 37 69
XBC7.8/25-80(100) 0.78
XBC8.0/25-80(100) 0.80
XBC11/25-80(100) 25 1.10 2900 75 69
XBC12/25-80(100) 1.20
XBC12.5/25-80(100) 1.25
XBC13/25-80(100) 25 1.30 2900 90 57
XBC14/25-80(100) 1.40
XBC15/25-80(100) 1.50
XBC3.0/45-100(125) 45 0.30 2900 22 73
XBC3.2/45-100(125) 0.32
XBC3.4/45-100(125) 0.34
XBC4.6/45-100(125) 45 0.46 2900 37 77
XBC4.8/45-100(125) 0.48
XBC5.0/45-100(125) 0.50
XBC7.6/45-100(125) 45 0.76 2900 55 80
XBC7.8/45-100(125) 0.78
XBC8.0/45-100(125) 0.80
XBC11/45-100(125) 45 1.10 2900 90 70
XBC12/45-100(125) 1.20
XBC12.5/45-100(125) 1.25
XBC2.8/55-150(200) 55 0.28 1450 30 78
XBC3.0/55-150(200) 0.30
XBC3.2/55-150(200) 0.32
XBC4.6/55-150(200) 55 0.46 1450 45 75
XBC4.8/55-150(200) 0.48
XBC5.0/55-150(200) 0.50
XBC7.6/55-150 55 0.76 2900 75 76
XBC7.8/55-150 0.78
XBC8.0/55-150 0.80
XBC11/55-150 55 1.10 2900 110 73
XBC12/55-150 1.20
XBC12.5/55-150 1.25
XBC13/55-150 45 1.30 2900 110 80
XBC14/55-150 1.40
XBC15/55-150 1.50
XBC4.6/100-200 100 0.46 1450 75 81
XBC4.8/100-200 0.48
XBC5.0/100-200 0.50
XBC3.0/150-250 150 0.30 1450 75 80
XBC3.2/150-250 0.32
XBC3.4/150-250 0.34
XBC4.6/140-250 140 0.46 1450 90 72
XBC4.8/140-250 0.48
XBC5.0/140-250 0.50
XBC2.4/200-300 200 0.24 970 75 81
XBC2.6/200-300 0.26
XBC2.8/200-300 0.28
XBC2.8/200-300(350) 200 0.28 1450 90 84
XBC3.0/200-300(350) 0.30
XBC3.2/200-300(350) 0.32
XBC4.0/200-300 200 0.40 970 132 84
XBC4.2/200-300 0.42
XBC4.4/200-300 0.44
XBC4.6/160-300 160 0.46 1450 110 78
XBC4.8/160-300 0.48
XBC5.0/160-300 0.50
XBC4.6/200-350 200 0.46 1450 160 83
XBC4.8/200-350 0.48
XBC5.0/200-350 0.50
XBC2.8/300-400 300 0.28 1450 132 76
XBC3.0/300-400 0.30
XBC3.2/300-400 0.32
XBC2.8/330-500 330 0.28 1450 160 78
XBC3.0/330-500 0.30
XBC3.2/330-500 0.32

Cnc Router With CCD


CCD Cnc Router with Visual system with Camera for Sign Board Cutting, Print image edge cutting, Versio.

Introduction:
1) Cnc Router With Ccd Vision Router System is among the most versatile CNC machining systems you will find on the market. The T-slot bed makes it very easy to place the sheet stock down for cutting and routing, and even setup custom jigs, fixtures and clamps for parts marking applications.
2) It can produce accurate, repeatable, cost-effective work in considerably less time than it takes to do t he same work by hand. Featuring our state-of-the-art Vision Controller and our graphically advanced Vision software, this machine is perfect for a wide variety of applications including milling, drilling, contouring, and routing.

3) Application for Routing out wood signs, Cutout letters, Control panels, Cutting out sheets of material and 3D signs in sign foam, wood and more!


Cnc Router with CCD camera for decoration Camera
The machine comes with a camera to realize the Vision function.
Cnc Router Machine's spindle  High Frequency Powerful spindle
The High quality UTECH R2 series Cnc Router Machine comes standard with 3.5kw high frequency spindle. This precision spindle requires no maintenance. Fully programmable speeds from 6000 to 24000 RPM, more powerful and less noise.
stepper motor Drive Motors
Patent design 1:4 gear reducer install on the driving motor, makes the motor is more powerful, and having a longer time service life.
The stepper motors are installed on all axes to ensure precise positioning of the gantry and the spindle in accordance with a predetermined program at high speed. Stepper motors are well proven high degree of reliability.
The machine is installed 4 pieces of motors.
woodworking cnc router for wood MDF UTECH Patent pressing clamp
The patent design pressing clamp is convenient for the user to assemble and disassemble the material.
plastic cnc cutting machine with CCD camera XYZ ASK Square Guide Rail(German)+Flange slider
HIGH PRECISION LINEAR GUIDE RAIL HIGH RIGIDITY OF [ASK" (German)
Due to the increased stability and rigidity provide high precision movement of the gantryand high-speed drilling spindles in X, Y, Z. achieved high machining accuracy and durability of the machine without loss of accuracy parameters.
KT plate cnc router with visual positioning system Machine handpiece
The spindle is fixed on the high quality aviation aluminum T061/6063 plate, the plate is machined by high precision CNC machining center.
Cnc Router with helical gear XY Helical Rack Gear(Germany)
Unlike gears with straight teeth, oblique engages gradually, not immediately over the entire length. Helical gearing has no zone-pair gearing. In spur gear the load on the teeth is applied instantly. The teeth in helical gears are loaded gradually as you approach them in the area of gear meshing is always at least two pairs of teeth
wood cnc machine TBI High-Precision Ball-screw Transmission (Taiwan)
1. High transmission efficiency.
2. High transmission accuracy, smooth movement, no creep phenomenon. The ball screw drive is basically rolling friction, and the frictional resistance is small. The frictional resistance has almost no relation with the speed of movement.
3. There is no free travel in the reverse direction. After the ball screw and nut are pre-tightened, the axial clearance can be eliminated. In this way, there is no dead zone in the reverse direction, which can improve the axial transmission accuracy and axial stiffness.


plastic cnc router

Cnc Router With CCD

Cnc Router With Ccd,Cnc Engraving Router With Ccd,3D Cnc Router With Ccd,Cnc Router With Ccd Camera

Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de