Welding Spare Parts Bn"T" Series Contact Tip for Welding Torch

Welding Spare Parts BN"T" Series Contact Tip For Welding Torch


Changzhou Huarui Welding & Cutting Co., LTD

Since the establishment in 1985, we have become one of the biggest manufacturers of welding
and cutting equipment and accessories in China by modern manufacturing equipment and
special technology. 
We are specialized in manufacturing MIG, TIG, PLASMA, Welding Torches and Spare parts.
With Euro connector, Lincoln connector , Miller connector and Tweco connector, we can fit
different kinds of foreign equipments.
1.MIG Welding Torch
Binzel, Bernard, Tweco, Esab, Lincoln/Tregaskiss, Panasonic/OTC, MAXI, Kemppi, Fronius,
Mechafin.
2.TIG Welding Torch
WP-24, WP-9,WP-17, WP-26, WP-20, WP-18, etc.
3.Plasma Cutting Torch
Trafimet, Cebora, Panasonic/Esab


FAQ
Q1: Can I get a samples to check the quality?
A:Sure,we can supply samples. For regular goods, the sample cost is different from the amount
you want. For our new products, there's a MOQ of the samples.
Q2: Can I put my logo on the boxes/cartons?
A: Yes, this can be made according to your requirements, but you should send us the trademark
authorization letter.
Q3: How can you guarantee your products quality ?
A: Huarui's each torch must pass the following tests before packing: Insulation resistance test,
High voltage test, Air/Water flow test, Air/Water seal test.
If there are defective items, we usually credit to our customer or replace in the next shipment.
Q4: What's the order procedure?
A: Firstly, we discuss the details together by e-mail or TM. Then we issue you a PI for your
confirmation or Trade Assurance Order Payment Link. You will be requested to do the pre-paid
full payment before we go into the production. After we get the payment, we start to process the
order. It usually takes 5-15days if we don't have the items in stock.

 

Return Idlers support the belt during the return path and meet the CEMA or ISO load requirements. The return idlers which carry the weight of the empty belt in the return side or the lower side of the belt conveyor are mostly single roller straight idler. The mass of the return belt is the only load that return idlers are required to support. As such, Return Idler sets are spaced at two to three times the pitch of their equivalent carrying-side idler sets. Return idler sets usually have one or two rolls per idler set, for similar reasons.

 

we look under the conveyor bed, we will find another set of changes. This area is called the conveyor return because the conveyor is returning for another load of ore. The idlers here are called return idlers.

Return Idlers support the belt during the return path and meet the CEMA or ISO load requirements. The return idlers which carry the weight of the empty belt in the return side or the lower side of the belt conveyor are mostly single roller straight idler. The mass of the return belt is the only load that return idlers are required to support. As such, return idler sets are spaced at two to three times the pitch of their equivalent carrying-side idler sets. Return idler sets usually have one or two rolls per idler set, for similar reasons.

 

we look under the conveyor bed, we will find another set of changes. This area is called the conveyor return because the conveyor is returning for another load of ore. The idlers here are called return idlers.

 

Flat return idlers comprise 1 or 2 rolls, the 1-roll design being more prevalent. In the case of a single flat return idler, the idler can be mounted onto two brackets which are secured to either side of the conveyor support structure as seen adjacent.

Flat Return Idlers
 

Where return idler sets comprise two rolls, a support frame is required which supports the idler pair and attaches the idlers to the conveyor frame. This 2-roll design forms the return belt into a 'v' trough and these return idler sets are referred to a 'V' return idlers.

 

In addition to the fixed base frames for return idlers, garland-type return idlers are also available which, like their equivalent troughing idlers, are more tolerant of conveyor structure misalignment.

Size of roller: 63.5, 76.1, 88.9, 101.6, 108, 114.3, 127, 133, 139.7, 152.4, 168.3, 193.7(cm)

Return Idler

Return Idler,V Return Idler,Rubber Disc Return Idler

Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl