Any car that has been used for a long time will get dirty and need to be cleaned. The same applies to refrigerated trucks. However, the cleaning of refrigerated trucks is relatively inconvenient. Refrigerant car cleaning includes both internal and external parts.
External cleaning:
Be sure to clean the car hood after it is thoroughly cooled down. When spraying, use scattered water to spray. It is best not to use a towel to scrub directly in the bucket, because the surface of the car body may carry sand, rub the body, and scratch the paint. Also do not use high-pressure water flushing. Excessive water pressure may cause damage to the paintwork.
When washing the car, it is washed from the top down, that is, from the roof, the front and rear covers, the side of the body, the lamps to the bumper, the skirt, and the wheels. Because the water runs from the top to the bottom with dirt, only from the top down can you wash cleanly and avoid scratches. After washing out the sand, wash your car with a sponge instead of a towel. The fiber of the towel is hard and not soft, which can easily hurt the body's paint and cause scratches. When cleaning the car, it is recommended that you use the best quality deerskin, and deerskin is the best cleaning material.
Internal cleaning:
Internal cleaning is a bit more troublesome than external cleaning. Internal cleaning includes unit cleaning, condenser and evaporator cleaning, and air intake system cleaning. It is important to note that after internal cleaning, do not allow water to remain in the vehicle and keep it dry. The condenser is kept clean and the fins are not detached, which will affect the heat dissipation. When cleaning the air intake system, use a professional anti-dust cleaner to clean it. To ensure that the air intake system of a refrigerated truck is clean, dry, and adequately airy, the normal function of the engine function, the stability and reliability of the work can be guaranteed, and the service life can also be increased.
Car wash is one of the most basic car care, many people think that as long as the clean. In fact, if you look at it from a professional perspective, it is still very knowledgeable. It's best to wash your car with care, so that you can touch the surface of your car body most directly. Any abnormalities can be felt by yourself.
1.2 Ton Pedestrian Type Electric Stacker
Zowell 1.2ton full electric walkie stacker, is an economic and compact industrial device for loading and lifting pallets on a shelf at high level. As an ideal choice to operate in narrow space of warehouse, it can be widely used in petroleum, chemical, pharmaceutical, textile, pigment, coal and other industries, as well as ports, railways, freight yards, warehouses.
Zowell 1.2ton full Electric Stacker maintains great advantages in safety, efficiency and cost. In addition to durability and accuracy both outside and inside, Zowell XE electric stackers are also equipped with mast with clear view, double speed and lateral vertical moving switch, which are valuable when working in limited space.
Detail features
1. Mast which can provide wide field of vision
The hydraulic cylinder is located at the right-middle side of the stacker, thus
providing a wider field of vision for the operator.
2. Double speed switch
The speed of this electric stacker can be freely switched between normal speed
and slow speed. The operators can choose slow speed to realize slow moving of the
stacker. This is especially suitable for new operators who are not familiar
with the operation of this equipment.
3. Lateral vertical moving
The stacker can move without pulling the handle. By pressing down the straight
moving button, the stacker can move slowly. This is suitable for working in
narrow aisles and other limited spaces.
4. Adjustable balance and supporting wheel
The adjustable balance wheel features strong stability, so that the operation
can be more stable, safer and more reliable.
5. Solid channel steel mast
Compared with the bending finished iron metal mast, the channel steel mast is
more solid and durable, more stable and safer.
6. Intelligent sleep mode
When the stacker is not in use for long time, the intelligent sleep mode will
be automatically initiate to save battery power and cost.
7. Handle of the best one-step length
The long operating handle adopts ergonomic design. The max ground clearance is
1305mm and the min ground clearance is 715mm, so that it quite easy to use.
During normal operation, the operators should be one-step away from the
stacker, so that their feet will not get caught by the wheel, thus ensuring
safety of the operators.
8. Split type mast
The fabricated connection of the mast and stacker frame can realize easy installation
and changing of the mast as necessary. The working device and moving device are
easily disassembled and changed.
9. Beautiful and tiny appearance
The base design: the front base is 600mm in length so that it is flexible and
suitable for working in narrow channels. It is the ideal choice for trans-floor
working.
Electric Pallet Stacker,Hand Stacker Full Electric ,Power Stacker Lift,Fully powered electric stacker
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com