Yokohama Type Pneumatic Rubber Fender

Posted on

Model NO.: 0.5X1.0MM---3.3X6.5MM
Structure: Floating
Type: Yokohama-Type, Net-Type, Sling-Type
Service Life: 10-20years
Certification: BV, ISO9001, CCS, ISO17357, ABS, Dnv, Lr
Capability: Water Rubber Hose
Load Capacity: >8000teu
Usage: Trade, Ship Launching, Protection, Ship Docking
Trademark: Star-Marine
Specification: 0.5X1.0MM---3.3X6.5MM
HS Code: 40169400

Product introduction:
ZHENJIANG STAR GROUP mainly produce: 

  • Yokohama type fender net type
  • Sling pneumatic rubber fender
  • Ribbed pneumatic rubber fender
Certificate: ABS, LR, BV, NK, DNV, RINA, RS, IRS,CCS etc.
Yokohama Type Pneumatic Fender also called chain and tyres net pneumatic fender. It is often installed on the terminal or ship, which aims to absorb or reduce the collision energy between ship to ship and ship to dock. Yokohama type Pneumatic Fenders are different with common type chain and tyres net pneumatic fenders. Generally, they are fitted with aircraft tyres ,which has high energy absorption and compression deformation.
Features:
1. Easy and fast to deploy 
2. Strong fender wall  & High duty aircraft tyres net 
3. High energy absorption, low reaction and hull pressure 
4. Suitable for small and large tidal ranges 
5. Application areas: Oil and gas tankers, Fast ferries and aluminium vessels , docks Ocean platforms etc. 
Structure: 

1.Outer Rubber 
Cover outside on the ball of rubber layer, which is used to protect skeleton material and inner rubber ball from damage of external force, the main features: high strength, wear resistance, ageing resistance and tear resistance.
2. Synthetic cord reinforced rubber layer
Reinforced cord rubber layer is composed of winding Synthetic cord layer, It is mainly used for maintain the internal air pressure, which has good elasticity, no deformation and high power etc. 
3. Inner Rubber 
On the ball inside the rubber layer, which is used to prevent air leakage and control the ball pressure. 
4. End Flange
The metal parts at both ends of fender, which can be fitted with charging valve and safety valve.
Specification: 
SIZE
 
D×L 		Initial Internal Pressure 0.05Mpa Initial Internal Pressure 0.08Mpa
Guaranteed 
     Energy
 Absorption 		Reaction Force Hull Pressure 
At GEA  		Guaranteed 
 Energy
 Absorption 		Reaction force Hull Pressure
 At GEA 
(mm) (KN/M) (KN) (Kpa) (KN/M) (KN) (Kpa)
0.5×1.0 6 64 132 8 85 174
0.6×1.0 8 74 126 11 98 166
0.7×1.5 17 137 135 24 180 177
1.0×1.5 32 182 122 45 239 160
1.0×2.0 45 257 132 63 338 174
1.2×2.0 63 297 126 88 390 166
1.35×2.5 102 427 130 142 561 170
1.5×3.0 153 579 132 214 761 174
1.7×3.0 191 639 128 267 840 168
2.0×3.5 308 875 128 430 1150 168
2.5×4.0 663 1381 137 925 1815 180
2.5×5.5 943 2019 148 1317 2653 195
3.0×5.0 965 1815 148 1341 2359 198
3.0×6.0 1184 2243 152 1646 2916 203
3.3×4.5 1175 1884 130 1640 2476 171
3.3×6.5 1814 3015 146 2532 3961 191
Note: Other size can be produced follow client's needs
 

    
 

 

Yokohama Type Pneumatic Rubber Fender
Yokohama Type Pneumatic Rubber Fender

Electric Iron

method of application

1. Before adding water, set the iron to the steam free gear 2. Open the water inlet and tilt the iron 3. Add water, the water should not exceed the water level 4. Plug in the electric heating, according to the clothing fabric, rotate to select the corresponding fabric gear 5. After selecting the gear, the indicator light will be on. When the indicator light is off, you can start ironing



Electric iron,Convenient iron,Travel iron

Heshan Zilong Home Appliance Technology CO.Ltd , https://www.techonelfoodmixer.com