Low-noise, no leakage, environmental protection, beautiful appearance, convenient installation.
OUR PRODUCTION
PUMP SPECIFICATIONS:
| Model | Power   (W) | Max Flow  (L/min) | Max Head (m) | Inlet/Outlet (inch) |
| HP12/9G | 105 | 23 | 9 | 0.75" |
Low-noise, no leakage, environmental protection, beautiful appearance, convenient installation.
OUR PRODUCTION
PUMP SPECIFICATIONS:
| Model | Power   (W) | Max Flow  (L/min) | Max Head (m) | Inlet/Outlet (inch) |
| HP12/9G | 105 | 23 | 9 | 0.75" |
Water-Cooled Industrial Chiller
New-designed RCM series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding
process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling.
They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surrounding factors. Therefore they
are necessary good equipments in modern industry.
1) Cooling temperature range 5-35°C.
2) High-capacity tube-in-shell evaporator with very good heat exchange performance especially under high ambient temperature condition.
3) Tube-in-shell condensers with excellent heat transfer and rapid cooling.
4) Stainless steel warm-keeping water tank.
5) R22 refrigerant to be used for efficient cooling.
6) R407 environment-friendly refrigerant is optional to use.
7) Overload protection for compressor, pump.
8) Independent Temperature Controller, anti-freeze protection.
9) Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
10) Warm-keeping design for all piping to avoid partial convection.
11) Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products
Introduction:
RCM-W series water cooled Industrial Chiller are applicable for cooling moulds to reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries
with the need of cooling.
Features:
Cooling temperature range 5~35°C.
Adopts stainless steel made insulated water tank and evaporator.
Equipped with anti-freeze thermostat.
R22 refrigerant is used as standard and optional R407 for efficient cooling.
Refrigeration loop controlled by high and low pressure switches.
Compressor and pump overload relays.
All adopt [COPELAND" US Brand compressors.
RCM-W series adopts tube-in-shell condenser design for quick heat transfer and excellent heat radiation.
Level meter of water tank is available as an option.
Low pressure pumps are standard configurations, while middle or high pressure pumps are optionally available.
Water-cooled industrial chiller schematic structure:
Screw Type Water-Cooled Industrial Chiller
Screw Type Water-Cooled Industrial Chiller,Industrial Chiller,Industrial Water Chiller,Screw Type Industrial Chiller
Ningbo Beilun Rhong Machinery Manufacturing Co., Ltd. , http://www.rhongmachinery.com