HUSKY pneumatic double diaphragm pump

HUSKY pneumatic double diaphragm pump working principle and characteristics 1, compressed air power.

2, is a volumetric pump caused by diaphragm reciprocating deformation volume change, its working principle is similar to the plunger pump, due to the characteristics of HUSKY pneumatic double diaphragm pump working principle, so the diaphragm pump has the following characteristics:

(1) The pump will not be overheated: the compressed air acts as a power source and is a process of expansion and heat absorption during exhaust. When the pneumatic pump is operating, the temperature is reduced and no harmful gas is discharged.

(2) No spark generation: Pneumatic diaphragm pumps do not use electricity as a power source, and they prevent static sparks after they are grounded.

(3) Liquids that can contain granules: Because of volumetric work and the inlet is a ball valve, it is not easily blocked.

(4) The shearing force of the material is extremely low: how to suck in how to spit it out during work, so the agitation of the material is minimal, and it is suitable for the delivery of unstable substances.

(5) The flow rate can be adjusted. A throttling valve can be installed at the material outlet to regulate the flow.

(6) Self-priming function.

(7) It can be run without danger.

(8) Can work in diving.

(9) The fluids that can be transported are extremely wide, from low viscosity to high viscosity, and get viscous from corrosion.

(10) No complicated control system, no cables, fuses, etc.

(11) Small size, light weight, easy to move.

(12) Maintenance is easy without lubrication, and the working environment will not be polluted due to dripping.

(13) The pump is always efficient and will not be reduced due to wear.

(14) One hundred percent of energy is used. When the outlet is closed, the pump stops automatically, and the equipment moves, wears, overloads, and heat. When the outlet opens, the pump automatically starts.

(15) No dynamic seal, easy maintenance to avoid leakage. There is no dead point at work. The HUSKY air operated double diaphragm pump has a simple, highly reliable air reversing valve. It is the HUSKY series product that can achieve maximum reliability in various applications. The reversing valve is a three-way pilot valve that guarantees true “stickiness” without lubrication. All parts can be replaced without opening the liquid chamber. Aluminum parts are anodized and coated with epoxy coating to resist corrosion from dirty air. 15 years of air motor and 5 years of quality assurance for the pump body. With: explosion-proof, zero leakage, simple operation, can be empty operation, self-priming, can be pressure shutdown, no mechanical seal, low shear force, can pass larger particles, no rotating parts are more suitable for abrasive occasions, easy maintenance Features. Some models can be delivered with powdered media with a slight modification.